CAUTION
Read and understand
all warnings
(Page 2
of this document)
before
beginning installation.
Contents
Overview -
Components .......................................................................................1
Overview -
Planning ..............................................................................................1
PLEASE READ -
Safety Information ....................................................................2
Section 1 -
Hanging Unit ......................................................................................3
Section 2 -
Operation............................................................................................3
Section 3 -
Adjusting for Level or Center of Gravity ........................................4
Section 4 -
Installing Projector ...........................................................................4
Section 5 -
Attaching Universal Projector Mount to Projector Pan ..............4
Section 6 -
Installing Optional Environmental Air Space Housing ...............5
Installing Optional Ceiling Trim Kit .............................................................................5
Section 7 -
Installing Ceiling Closure .................................................................5
Section 8 -
Connecting Controls to Data Cable Splitter Board ....................6
Section 9 -
Clearing and Resetting Show Position ..........................................6
Section 10 -
Optional Delay Feature ...................................................................6
Section 11 -
Electrical Connections ...................................................................7
Section 12 -
Operation ..........................................................................................7
Section 13 -
Testing Safety Limit Switches .......................................................7
Section 14 -
Adjusting Limit Switches ...............................................................7
Section 15 -
Wiring Schematic ............................................................................8
Section 16 -
Dimensions ......................................................................................8
Overview -
Components
Overview -
Planning
1.
Based on screen location and projector
specifications, determine proper position for
projector installation.
2.
Confirm that there is adequate space for
installation and operation. Minimum clearance
above ceiling level varies according to height
of projector, optional projector mounting
bracket, optional ceiling closure and optional
Environmental Housing.
3.
Arrange to provide service access to the unit.
4.
When installed with Environmental Air Space Housing
unit is suitable for use in an environmental air space
in accordance with Section 300.22
(C)
of the National
Electrical Code, and Section 2-128, 12-010
(3)
and 12-100
of the Canadian Electrical Code, Part 1, CSA C22.1.
5.
Total capacity of lift including cables, closure, projector,
and bracket:
As Soon As Lift Arrives
1.
Open carton and inspect for damage.
2.
Locate the following parts:
A.
The unit itself
B.
Controls
C.
Any optional equipment
SL4
132 LBS.
60KG
SL6
125 LBS.
56.7KG
SL8
118 LBS.
53.5KG
SL10
108 LBS.
49KG
SL12
100 LBS.
45.4KG
TOOLS REQUIRED
POWER DRILL
PENCIL
TAPE MEASURE
HARDWARE
(by others)
LEVEL
PLIERS
HEX WRENCH
SCREWDRIVER
Draper, Inc. | 411 S. Pearl St. Spiceland, IN 47385
draperinc.com | 765.987.7999 | 800.238.7999
© 2022 All Rights Reserved
|
FORM: ScissorLiftSL_Inst22
Scissor Lift SL
Ceiling-recessed video projector lift
INSTRUCTIONS
INSTALLATION & OPERATION
If you have any difficulties installing or servicing your
Scissor Lift SL, call your dealer or Draper, Inc.
