www.draytek.net.nz
www.snappernet.co.nz
Vigor2760 Delight
» Quick Start Guide
Configure your computer’s network
Connect your computer to the Vigor2760 with an Ethernet cable (supplied). Ensure your computer is obtaining an IP
address automatically.
Connect to the Web Interface
Open your Web Browser (e.g. Internet Explorer, Google Chrome or Mozilla Firefox), enter
http://192.168.1.1/
into
the address bar, and press the Enter key on your keyboard.
You should be asked for a username and password. Enter
admin
into both fields (the password may show as dots or
stars) and click the
Login
button.
Run the Quick Start Wizard
On the left-hand navigation menu, click
Wizards
and then
Quick Start Wizard
.
Choose a new login password - you will use this to log into the Web Interface in
future. Enter the current password (admin) into the Old Password field. Enter your
new password into the
New
and
Confirm Password
fields and click
Next >
Note: The passwords may show as dots or stars
In the WAN Interface section you can leave all settings as default
unless
you are connecting to
VDSL
on a Chorus
line in which case you must enable
VLAN Tag insertion
and set the
Tag value
to
10
, then click
Next >
