Radio Controlled Quadcopter
™
Radio
2G Memory Card
USB Card
Reader
Rotor Blade Guards
AAA Batteries (2)
USB Charge Cord
Spare Blades
(2 black, 2 white)
Flight Battery
KODO Quadcopter
CHARGING THE FLIGHT BATTERY
•
NEVER
leave the battery unattended while
charging.
•
DO NOT
allow the USB port to power down
while the charger is connected to the battery.
•
ALWAYS
unplug the charger from the USB port
and the battery when charging is complete.
Plug the charger into a USB to AC adapter
or USB port on a computer as shown
and connect the battery. The red LED
will flash slowly while charging and be
steady when the charge is complete.
RADIO SETUP
Remove the screw on the battery compartment cover. Take the cover off and insert 2 AAA batteries.
RADIO
For Mode 1 operation, slide the mode
switch to the MD1 position and hold the
controller with the throttle on the right side.
For Mode 2 operation, slide the mode
switch to the MD2 position and hold the
controller with the throttle on the left side.
