Vista UAV Quadcopter
Flight
Battery
Spare Blades
(2 black, 2 color)
AAA Batteries (4)
Radio
Screwdriver
USB Charger
™
Radio Controlled
Quadcopter
CHARGING
Plug the charger into a USB to AC adapter (DIDP1125 not included)
or a computer USB port and connect the battery. The red LED will
be steady while charging and fl ash when the charge is complete.
●
NEVER
leave the battery unattended while charging.
●
DO NOT
allow the USB port to power down while the charger
is connected to the battery.
●
ALWAYS
unplug the charger from the USB port and the
battery when charging is complete.
●
NEVER
charge a puffed or damaged battery.
CONTROLLER SETUP
Remove the screw
and slide the cover
down to insert the
included 4 A A A
batteries.
LINKING
1. Turn on the controller with
the left stick at its lowest
position.
2.
Connect the
battery to the
Vista and place it
on a level surface.
The red LED on
the quad will fl ash
rapidly when the quad is linked to the controller.
1
2
FLYING
FLYING BASICS
1. Place the Vista on the ground at least 6 feet away with the
tail facing you.
2. Take off by “slowly” advancing the left stick until the quad
takes off. Change the altitude using small movements.
3. Use the right stick to make the Vista move left, right, forward
or backward. Keep in mind that when the nose is facing you,
moving the right stick to the right will make the quad appear
to move to the left.
4. Moving the left stick to the left or right will rotate the nose
of the Vista left or right.
5. Always use small stick movements to control the Vista until
you are familiar with the how the model responds to the
controls.
6. Always unplug the Vista’s battery and turn off the transmitter
when you’re done fl ying.
