OWNERS MANUAL
Gale Force/Clean Force Air Mover Stand Mounting Instructions
Read instructions before use.
Save these instructions
CONTENTS NEEDED:
• Both metal side brackets (Picture 1)
• Both shoulder pins (Picture 2)
• Both nylon spacers (Picture 3)
• 8- 1
1
⁄
4
” screws (Picture 4)
Remove the screws in the nut certs and discard screws.
Line up nylon spacer with metal side bracket and using
longer screws attach to the air mover.
Screw the shoulder pins into the center of each bracket.
Slide the shoulder pin into the notches on the stand. Aim
the air mover to desired position and insert both locking
pins through the holes to hold the air mover in position.
2
1
3
4
Picture 1
Picture 2
Picture 3
Picture 4
