DTSystems TDS1 S/R, Handbook

Handbook Contents

Box Contents

H

   Safety

1 x TDS1 S/R

I

   Installation

1 x Power Supply

I

   Facilities

1 x Telephone Lead

I

   Operation

1 x Handbook

I

   Troubleshooting

I

   Warranty

I

   Technical Details

This symbol is used to alert the user to important operating or 
maintenance instructions.
The Lightning bolt triangle is used to alert the user to the risk of electric 
shock.

SAFETY

1. It is important to read these instructions and follow them.
2. Keep this instruction manual for reference.
3. Do not operate this unit in a damp environment. It is not waterproof.
4. Refer installation and servicing to qualified personnel.
5. This unit is double insulated and safe to use without an earth connection. The 

case does not connect to a protective earth unless provided by the screen of 
the line input XLR connector (pin 1).

INSTALLATION - Please read ALL this Manual before starting

First of all, plan your installation and decide where to fit your TDS1 S/R. It needs 
to be close to a telephone socket, have mains power and an audio signal feed. In 
MANual mode, you will be using a telephone to call the listener, so it may be 
convenient to install the unit in an ante or side room where no-one will be 
disturbed by your conversations. The TDS1 S/R generates virtually no heat and 
so can be installed in any dry, convenient location. 

Unpack the unit and check the contents against the list above. As supplied, the 
TDS1 S/R is set to 100V line working and the three hour timer enabled.

You will need the following to
get your TDS1

 S/R 

 to work:

l

 Working telephone line

l

 Audio signal

l

 Mains power

l

 Another telephone eg a mobile to 

test operation.

l

 Two small screwdrivers, a posidrive 

to remove the lid and a flat blade to 
adjust the volume.

Issue 1.2
January 2006

For latest Handbook 
see www.dt4u.com

15V 
ac/dc 
Power 
supply

TDS1 S/R

Telephone Socket

PA Amplifier

Power

Audio

Telephone

Telephone Dialup System

TDS1 S/R HANDBOOK