background image

1

ENGLISH

Projector

8105HA/8106HA/8104HWA

User's Manual (concise)

Thank you for purchasing this projector.
Please read through this manual before using this product, in order to use safely 

and utilize well the product.

WARNING

  

►Before using this product, be sure to read all manuals for this 

product. See the “Using the CD manual” (

19

) to read the manuals in the CD. 

After reading them, store them in a safe place for future reference.

►Heed all the warnings and cautions in the manuals or on the product.

►Follow all the instructions in the manuals or on the product.

First of all

 ............................................ 2

  Entries and graphical symbols explanation ......2
  Important safety instruction ..............................2

Regulatory notices .............................. 3

  About Electro-Magnetic Interference ................

3

  About Waste Electrical and Electronic Equipment ...4

Contents of package........................... 4

Arrangement ....................................... 5

Connecting with your devices ............. 6

Connecting power supply ................... 7

Using the cable cover ......................... 8

Preparing for the remote control ......... 9

Turning on the power ........................ 10

Adjusting the projector's elevator ..... 11

Operation .......................................... 11

Turning off the power ........................ 13

Replacing the lamp ........................... 14

Cleaning and replacing the air filter

 .. 16

Replacing the internal clock battery.. 17

Caring for the mirror and lens ........... 18

Using the CD manual ....................... 19

Specifications

 ................................... 20

Troubleshooting  

  - Warranty and after-service ........... 21

Contents

NOTE

  • In this manual, unless any comments are accompanied, “the 

manuals” means all the documents provided with this product, and “the product” 

means this projector and all the accessories came with the projector.

430-8104HWA–8105HA-8106HA-Concise-00

Summary of Contents for 8104HWA


























Reviews: