The more you learn about the DC Brick, the better you’ll like it.
Check this out: It’ll power up to TEN pedals or stomp boxes at
once…even mixing up 9V and 18V…but that’s just the beginning.
It’s ready made for world touring, because it’ll accept nearly ANY
incoming AC power – from 100 to 240 volts, at 47 to 63 Hz. Just slap
on an adapter (sold separately) for the country you’re in and plug
away…it’s not picky.
Its seven 9V and three 18V outputs can all be used simultane-
ously without fear of overload or overheating. With a 1000 milliamp
output capacity, you’re not likely to get anywhere near its limits.
Best of all is the consistency of the DC (direct current) power it
puts out. Unlike aging batteries, the DC Brick supplies predict-
able, regulated voltage at all times, keeping your effects consis-
tent from gig to gig. Finally…an effects power box that lives up to
Dunlop’s “live performance” quality!
POWER REQUIREMENTS
The DCB-10 DC BRICK requires a Dunlop ECB06 AC power
adapter (included), 18 Watt, 18VDC @ 1,000mA regulated.
5.5 mm x 2.1 mm (+) positive barrel (-) negative center.
The DC BRICK can utilize a wide range of international
wall power from 100 to 240 volts, at 47 to 63 Hz. Supplied
with U.S. plug. Optional international wall plugs can be
ordered from your Dunlop dealer.
