Dwyer Instruments LOVE Iso Verter II Installation Instructions Download

Page: 1 / 4

June, 2000

Page 1

949-0532-1

Iso Verter®II

Model SC468 and SCL468

INSTALLATION INSTRUCTIONS

Dimensions in mm (inches)

Dimensions

Getting Started

1.) Using a small screwdriver, ball point pen, etc. set the four switches on

the side of the unit (see Input Programming and Output Programming
on page 2).

2.) Mount unit into panel. (see Mounting on page 3).
3.) Connect unit to input signal, output signal, and power wiring (see Wir-

ing on page 4).

4.) Check calibration (See Calibration on page 4).

Specifications are on page 4.

a Division of Dwyer Instruments, Incorporated

PO Box 338 Michigan City, IN 46361-0338

(800) 828-4588 (219) 879-8000 FAX (219) 872-9057

www.love-controls.com

❍

LOVE CONTROLS

LOVE

Summary of Contents for LOVE Iso Verter II

Page 1: ...it see Input Programming and Output Programming on page 2 2 Mount unit into panel see Mounting on page 3 3 Connect unit to input signal output signal and power wiring see Wir ing on page 4 4 Check cal...

Page 2: ...O SUPPRESSION switch Use the ZERO adjustment to sup press the output 7 Switch eight is always OFF It is not connected to any circuitry If switch eight is turned ON there is no effect on the operation...

Page 3: ...tially le thal voltage is present on some of the internal components Do not open the unit There are no internal adjustments or user serviceable parts in the unit Mounting Mount the unit in a panel on...

Page 4: ...3 Apply the appropriate input for the high end of the scale 4 Adjust the SPAN screw for the appropriate high end output 5 Repeat as necessary Specifications Power Supply SC468 85 to 265 Vac Vac 50 to...