10/15
SPECIFICATIONS
Type
Sensorless
Constant/Peak
60A/90A
Resistance
1.7mΩ
Function
Proportional forward, proportional reverse with braking delay
Input Voltage
2-3S LiPo, 6-8 Cell NiMH
BEC Output
6V/2A
Overload Protection
Thermal
Dimensions (LxWxH)
40mm x 32mm x 19mm
Weight
51g
QUICK START GUIDE
The quick start setup guide will get you running quickly
using the ESC’s default settings.
1. Mount the ESC and motor in the car.
2. Connect the ESC to the motor.
3. Connect the ESC receiver lead to CH2 on your receiver.
4. Ensure the ESC switch is OFF.
5. Connect a fully charged battery.
6. Calibrate ESC to the transmitter.
7. Set battery chemistry.
MOUNTING THE SPEED CONTROL
Mount the ESC in the location specified by your vehicle’s
instruction manual. Use double-sided foam tape to secure
the speed control in position.
Ensure all wiring connections can be reached prior to
mounting.
Use double-sided foam tape to secure the switch to a
convenient location in the vehicle.
LIMITED WARRANTY
What this Warranty Covers
Horizon Hobby, LLC, (Horizon) warrants to the original purchaser
that the product purchased (the “Product”) will be free from
defects in materials and workmanship at the date of purchase.
What is Not Covered
This warranty is not transferable and does not cover (i) cosmetic
damage, (ii) damage due to acts of God, accident, misuse,
abuse, negligence, commercial use, or due to improper use,
installation, operation or maintenance, (iii) modification of or to
any part of the Product, (iv) attempted service by anyone other
than a Horizon Hobby authorized service center, (v) Product not
purchased from an authorized Horizon dealer, or (vi) Product not
compliant with applicable technical regulations, or (vii) use that
violates any applicable laws, rules, or regulations.
OTHER THAN THE EXPRESS WARRANTY ABOVE, HORIZON
MAKES NO OTHER WARRANTY OR REPRESENTATION, AND
HEREBY DISCLAIMS ANY AND ALL IMPLIED WARRANTIES,
INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES
OF NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR
A PARTICULAR PURPOSE. THE PURCHASER ACKNOWLEDGES
THAT THEY ALONE HAVE DETERMINED THAT THE PRODUCT
WILL SUITABLY MEET THE REQUIREMENTS OF THE
PURCHASER’S INTENDED USE.
Purchaser’s Remedy
Horizon’s sole obligation and purchaser’s sole and exclusive
remedy shall be that Horizon will, at its option, either (i)
service, or (ii) replace, any Product determined by Horizon to
be defective. Horizon reserves the right to inspect any and all
Product(s) involved in a warranty claim. Service or replacement
decisions are at the sole discretion of Horizon. Proof of purchase
is required for all warranty claims. SERVICE OR REPLACEMENT
AS PROVIDED UNDER THIS WARRANTY IS THE PURCHASER’S
SOLE AND EXCLUSIVE REMEDY.
Limitation of Liability
HORIZON SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT,
INCIDENTAL OR CONSEQUENTIAL DAMAGES, LOSS OF
PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY
WAY, REGARDLESS OF WHETHER SUCH CLAIM IS BASED IN
CONTRACT, WARRANTY, TORT, NEGLIGENCE, STRICT LIABILITY
OR ANY OTHER THEORY OF LIABILITY, EVEN IF HORIZON HAS
BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Further, in no event shall the liability of Horizon exceed the
individual price of the Product on which liability is asserted.
As Horizon has no control over use, setup, final assembly,
modification or misuse, no liability shall be assumed nor
accepted for any resulting damage or injury. By the act of use,
setup or assembly, the user accepts all resulting liability. If you
as the purchaser or user are not prepared to accept the liability
associated with the use of the Product, purchaser is advised to
return the Product immediately in new and unused condition to
the place of purchase.
Law
These terms are governed by Illinois law (without regard to
conflict of law principals). This warranty gives you specific legal
rights, and you may also have other rights which vary from state
to state. Horizon reserves the right to change or modify this
warranty at any time without notice.
WARRANTY SERVICES
Questions, Assistance, and Services
Your local hobby store and/or place of purchase cannot provide
warranty support or service. Once assembly, setup or use of the
Product has been started, you must contact your local distributor
or Horizon directly. This will enable Horizon to better answer your
questions and service you in the event that you may need any
assistance. For questions or assistance, please visit our website
at www.horizonhobby.com, submit a Product Support Inquiry, or
call the toll free telephone number referenced in the Warranty
and Service Contact Information section to speak with a Product
Support representative.
Inspection or Services
If this Product needs to be inspected or serviced and is
compliant in the country you live and use the Product in,
please use the Horizon Online Service Request submission
process found on our website or call Horizon to obtain a Return
Merchandise Authorization (RMA) number. Pack the Product
securely using a shipping carton. Please note that original boxes
may be included, but are not designed to withstand the rigors
of shipping without additional protection. Ship via a carrier that
provides tracking and insurance for lost or damaged parcels, as
Horizon is not responsible for merchandise until it arrives and is
accepted at our facility. An Online Service Request is available at
http://www.horizonhobby.com/content/_service-center_render-
service-center. If you do not have internet access, please contact
Horizon Product Support to obtain a RMA number along with
instructions for submitting your product for service. When calling
Horizon, you will be asked to provide your complete name,
street address, email address and phone number where you
can be reached during business hours. When sending product
into Horizon, please include your RMA number, a list of the
included items, and a brief summary of the problem. A copy
of your original sales receipt must be included for warranty
consideration. Be sure your name, address, and RMA number
are clearly written on the outside of the shipping carton.
NOTICE: Do not ship LiPo batteries to Horizon. If you
have any issue with a LiPo battery, please contact the
appropriate Horizon Product Support office.
Warranty Requirements
For Warranty consideration, you must include your original
sales receipt verifying the proof-of-purchase date.
Provided
warranty conditions have been met, your Product will be
serviced or replaced free of charge. Service or replacement
decisions are at the sole discretion of Horizon.
Non-Warranty Service
Should your service not be covered by warranty, service
will be completed and payment will be required without
notification or estimate of the expense unless the expense
exceeds 50% of the retail purchase cost
. By submitting the
item for service you are agreeing to payment of the service
without notification. Service estimates are available upon
request. You must include this request with your item submitted
for service. Non-warranty service estimates will be billed a
minimum of ½ hour of labor. In addition you will be billed for
return freight. Horizon accepts money orders and cashier’s
checks, as well as Visa, MasterCard, American Express, and
Discover cards. By submitting any item to Horizon for service,
you are agreeing to Horizon’s Terms and Conditions found on
our website http://www.horizonhobby.com/content/_service-
center_render-service-center.
ATTENTION: Horizon service is limited to Product compliant
in the country of use and ownership. If received, a non-
compliant Product will not be serviced. Further, the sender
will be responsible for arranging return shipment of the
un-serviced Product, through a carrier of the sender’s
choice and at the sender’s expense. Horizon will hold non-
compliant Product for a period of 60 days from notification,
after which it will be discarded.
MOTOR TO ESC CONNECTION
1. Connect the blue motor lead to the blue ESC lead.
2. Connect the yellow motor lead to the yellow ESC lead.
3. Connect the orange motor lead to the orange ESC lead.
If the motor turns in the wrong direction, reverse the connection of any 2 motor wires.
NOTICE:
Always disconnect the battery from the ESC when you have finished operating your vehicle. The ESC’s switch only
controls power to the receiver and servos. The ESC will continue to draw current when connected to the battery, resulting
in possible damage to the battery through over discharge.
ESC CALIBRATION PROCEDURE
Ensure proper ESC function by calibrating the ESC to your transmitter inputs. The motor should be left connected during
calibration, it will not run during calibration for safety.
1. Power OFF the ESC.
2. Ensure your transmitter is powered ON, the throttle is not reversed, the throttle trim is neutral and the throttle travel
range is at 100%. Disable any special functions such as ABS, etc.
3. Press the SET button while powering ON the ESC. Release the button as soon as the red LED starts to flash and the
motor emits a beep.
4. Calibrate the throttle points by pressing the SET button once after each step.
• Set Neutral: leave the throttle at rest, untouched and press the SET button
(1 green flash; 1 motor)
• Set Full Throttle: pull the throttle fully back, then press the SET button
(2 green flashes; 2 motor beeps)
• Set Full Brake/Reverse: push the throttle fully forward, then press the SET button
(3 green flashes; 3 motor beeps)
NOTICE:
The motor will NOT run during the calibration procedure.
5. Power off the ESC. The ESC is calibrated and ready to run.
ESC FUNCTIONS AND MODES
The ESC includes programming options so you can adjust the way your vehicle performs.
Refer to the included settings table to adjust the ESC for your driving conditions.
ESC PROGRAMMING PROCEDURE
Programming is accomplished using the SET button on the ON/OFF switch.
1. Connect a fully charged battery to the ESC.
2. Power ON the ESC using the ESC switch.
3. Press and hold the SET button for 3 seconds until the green LED flashes, then release the SET button.
4. Press the SET button once until the green LED blinks once in sequence, indicating programmable value 1 is currently
selected.
Pressing the setup button once more moves to programmable value 2, etc. until the desired programmable value is
reached. The system continues in a ‘loop’.
5. When at the desired menu item, hold the SET button for 3 seconds until the red LED blinks.
The RED flashing sequence indicates the actual setting; for example one flash indicates value 1 is selected, two
flashes indicates value 2, etc..
6. Press the setup button in sequence to select the desired programmable value. The system continues in a “loop.”
7. Save the setting by holding the SET button for 3 seconds. The motor beeps once.
8. Power OFF the ESC then immediately power it ON. The setting change is stored.
Only one setting can be stored/saved at a time.
WARRANTY AND SERVICE CONTACT INFORMATION
Country of
Purchase
Horizon Hobby
Contact Information
Address
United States
of America
Horizon Service Center
(Repairs and Repair
Requests)
s
ervicecenter.horizonhobby.
com/
RequestForm/
4105 Fieldstone Rd
Champaign, Illinois, 61822 USA
Horizon Product Support
(Product Technical
Assistance)
productsupport@horizonhobby.
com
877-504-0233
Sales
websales@horizonhobby.com
800-338-4639
European Union
Horizon Technischer
Service
service@horizonhobby.eu
Hanskampring 9
D 22885 Barsbüttel, Germany
Sales: Horizon Hobby
GmbH
+49 (0) 4121 2655 100
COMPLIANCE INFORMATION FOR THE EUROPEAN UNION
EU Compliance Statement:
Horizon Hobby, LLC
hereby declares that this product is in compliance
with the essential requirements and other relevant
provisions of the EMC Directive.
A copy of the EU Declaration of Conformity is available
online at:
http://www.horizonhobby.com/content/support-render-
compliance.
Instructions for disposal of WEEE by
users in the European Union
This product must not be disposed of with other
waste. Instead, it is the user’s responsibility to
dispose of their waste equipment by handing
it over to a designated collections point for the recycling of
waste electrical and electronic equipment. The separate
collection and recycling of your waste equipment at the time
of disposal will help to conserve natural resources and ensure
that it is recycled in a manner that protects human health and
the environment. For more information about where you can
drop off your waste equipment for recycling, please contact
your local city office, your household waste disposal service or
where you purchased the product.
NOTICE
All instructions, warranties and other collateral documents are subject to change at the sole discretion of Horizon Hobby, LLC. For up-to-
date product literature, visit horizonhobby.com and click on the support tab for this product.
MEANING OF SPECIAL LANGUAGE
The following terms are used throughout the product literature to indicate various levels of potential harm when operating this product:
WARNING:
Procedures, which if not properly followed, create the probability of property damage, collateral damage, and serious injury
OR create a high probability of superficial injury.
CAUTION:
Procedures, which if not properly followed, create the probability of physical property damage AND a possibility of serious injury.
NOTICE:
Procedures, which if not properly followed, create a possibility of physical property damage AND a little or no possibility of injury.
WARNING:
Read the ENTIRE instruction manual to become familiar with the features of the product before operating. Failure to
operate the product correctly can result in damage to the product, personal property and cause serious injury.
This is a sophisticated hobby product. It must be operated with caution and common sense and requires some basic mechanical ability.
Failure to operate this Product in a safe and responsible manner could result in injury or damage to the product or other property. This
product is not intended for use by children without direct adult supervision. Do not attempt disassembly, use with incompatible components
or augment product in any way without the approval of Horizon Hobby, LLC. This manual contains instructions for safety, operation and
maintenance. It is essential to read and follow all the instructions and warnings in the manual, prior to assembly, setup or use, in order to
operate correctly and avoid damage or serious injury.
Age Recommendation: Not for children under 14 years. This is not a toy.
FUZE
™
60A Sport Brushless ESC
Instruction Manual
TROUBLESHOOTING GUIDE
SYMPTOM
SOLUTION
ESC switch powered ON,
but no motor function and no
audible tone
Recharge or replace battery
Ensure all connections are secure
Repair or replace ESC switch or ESC
Ensure ESC programming for battery is correct for your battery
Motor turns in the wrong
direction
Change connections of any 2 motor wires to the ESC and ensure motor turns in the
correct direction
Motor stops
When red ESC LED flashes, recharge or replace battery
When red and green LEDs alternate flashing, let motor and ESC cool, changing set up
or gearing to avoid overheating
Ensure ESC programming is correct for voltage and battery
Disconnect battery and let ESC cool
Ensure ESC programming is not causing overheating
Replace gearing
Ensure gearing is not causing overheating
Motor accelerates irregularly
Replace with a high-power battery
Replace battery
Replace damaged wiring
Adjust or replace gearing
Motor does not turn
continuously in response to
throttle
Replace wiring or motor
Ensure good reception between transmitter and receiver
Replace ESC
Steering servo operates but the
motor does not run
Ensure all ESC programming matches your installed systems requirements for safety
Ensure all receiver connections are correct and secure
Test the motor apart from the vehicle system and repair or replace motor as needed
Recharge or replace batteries
Ensure all motor connections are secure
Adjust throttle travel or other throttle settings on the transmitter and re-calibrate the ESC
Steering and motor do not
function
Ensure all connections to receiver are correct and secure
Refer to manufacturer’s instructions to repair or replace transmitter
Recharge or replace batteries
Vehicle does not operate at full
speed
Recharge or replace batteries
Ensure ESC programming is correct for voltage and battery
Adjust transmitter settings, such as trim, throttle travel, etc.
Ensure ESC settings are correct for system
Re-calibrate ESC
Motor slows but will not stop
Adjust transmitter settings, such as trim, throttle travel, etc.
Ensure ESC settings are correct for system
Re-calibrate ESC
Decreased transmitter range
Repair or replace system antennas
Repair or replace damaged wiring and electrical parts
Move receiver or adjust antenna location so that no metal parts are between the
antenna and the transmitter
Recharge or replace batteries
Refer to receiver and transmitter manufacturer’s instructions to adjust reception or
change to a free and open radio frequency
Speed Control
Receiver
Brushless
Motor
CH1
CH2
Motor Battery
Steering
Servo
ON/OFF SET
WIRING
DIAGRAM
(DYNS2405)
ESC LED STATUS
• I
n the neutral position, no LEDs are lit.
• The red LED lights when the car is moving forward, reversing or braking (sensorless motor).
• The green LED lights when the car is moving forward, reversing or braking (sensored motor).
• The red LED flashes if the battery voltage has reached LVC.
• The red and green LEDs light alternately, indicating the ESC overheating protection is enabled.
• The red LED lights if the receiver signal is incorrect or missing.
© 2018 Horizon Hobby, LLC. Dynamite, Tazer, and the Horizon Hobby Logo are trademarks or registered trademarks of Horizon Hobby, LLC.
Created 04/2018 | 58029
PROGRAMMABLE ITEMS
Basic Items
PROGRAMMABLE VALUE
Default Settings
1
2
3
4
1 Running Mode
Forward w/ brake
Forward/Reverse w/
brake
2 Drag Brake Force
0%
5%
10%
20%
3 Low Voltage Cutoff
non-protection
3.0V/Cell
3.2V/Cell
3.4V/Cell
4 Start Mode
Level 1
Level 2
Level 3
Level 4
5 Max Brake Force
25%
50%
75%
100%
6 Punch
Level 1
Level 2
Level 3
Level 4
DESCRIPTIONS
1. Running Mode:
-
Forward Only with Brake
Intended for competition use, this mode allows only forward and brake controls.
-
Forward/Reverse with Brake
This mode is the basic all-around mode, allowing forward, reverse and brake controls. To engage reverse while moving forward,
apply the brake until the vehicle has come to a complete stop, release brake, then apply the brake again. While braking or in
reverse, engaging the throttle will result in the vehicle immediately accelerating forward.
2. Drag Brake Force
Adjusts the amount of brake automatically applied when the throttle is returned to the neutral position. This simu-
lates the engine braking effect of a full-scale vehicle, allowing improved turn-in and your vehicle’s general response
to controls.
3. Low Voltage Cutoff
This function helps to prevent battery over-discharge. The ESC continuously monitors the battery’s voltage. If the
voltage falls below the voltage threshold for 2 seconds, the output power shuts off and the red LED flashes twice
repeatedly.
The cutoff threshold calculation is based on individual Li-Po cell voltage. For Ni-MH batteries, if the voltage battery
pack is higher than 9.0V, it will be treated as a 3-cell Li-Po battery pack; if it is lower than 9.0V, it will be treated as a
2-cell Li-Po battery pack. Example: for a 8.0V Ni-MH battery pack used with a 2.6V/cell threshold, it will be treated as
a 2-cell Li-Po battery pack and the low-voltage cut-off threshold will be 5.2V (2.6 x 2=5.2).
4. Start Mode
Sets the initial throttle punch when the car accelerates. Level 1 gives
a very soft initial acceleration and Level 4 gives a stronger initial acceleration.
5. Max Brake Force
Adjusts the maximum braking force. A higher value provides stronger braking,
but can also cause the wheels to lock, resulting in loss of control of the car.
6. Punch
Select from start mode Level 1 (Soft) to Level 9 (Very aggressive). If you choose Levels 7–9, use a high quality battery
pack with powerful discharge ability. Without a high quality battery pack, the modes will not give a bursting start
effect. If the motor does not run smoothly (i.e., trembling), choose a better battery or increase the gear rate.
