PNEUMATIC
STRAIGHT-LINE SANDER
INSTRUCTIONS
Part #13747
© Copyright 2015 Easthill Group, Inc. 10/15 Instruction Item #13747Q Rev. 0
If you have any questions about the use of this product, please contact
The Eastwood Technical Assistance Service Department: 800.544.5118 >> email: techelp@eastwood.com
PDF version of this manual is available online >> eastwood.com/13747manual
The Eastwood Company 263 Shoemaker Road, Pottstown, PA 19464, USA
US and Canada: 800.345.1178 Outside US: 610.718.8335
Fax: 610.323.6268 eastwood.com
MAINTENANCE
• Add several drops of air tool oil before each use by dropping directly into the air inlet.
• If tool is to be unused for an extended period, add 10 drops of air tool oil directly into the air
inlet then store the tool, handle up.
• With the air supply disconnected, periodically check that the abrasive strip is tight and not torn.
TROUBLESHOOTING
• Tool doesn’t respond to trigger depression:
- Verify suffi cient air supply to tool.
- Check for moisture in air line and tool air inlet.
• Tool performance is slow or sluggish:
- Verify suffi cient air supply to tool.
- Check for moisture in air line and tool air inlet.
ADDITIONAL ITEMS
Paper-Backed, Aluminum Oxide Sanding Long Boards, 2-3/4" x 17-1/2"
#31363
P40 Grit, 50-pack
#31362
P80 Grit, 50-pack
#31364
P120 Grit, 50-pack
#19609
P180 Grit, 100-pack
#31365
P220 Grit, 100-pack
#19610
P320 Grit, 100-pack
#19611
P400 Grit, 100-pack
Film-Backed, Aluminum Oxide Sanding Long Boards, 2-3/4" x 17-1/2"
#50877
P40 Grit, 50-pack
#50878
P80 Grit, 100-pack
#50879
P120 Grit, 100-pack
