background image

 

 

EasySYNC Ltd 

Unit 1, 2 Seaward Place, Centurion Business Park, Glasgow, G41 1HH, United Kingdom 

Tel.: +44 (0) 141 418 0181    Fax: + 44 (0) 141 418 0110 

E-Mail (Support): 

support@easysync-ltd.com

   Web: http://easysync-ltd.com 

 

 

 

Neither the whole nor any part of the information contained in, or the product described in this manual, may be adapted or reproduced 
in  any  material  or  electronic  form  without  the  prior  written  consent  of  the  copyright  holder.  This  product  and  its  documentation  are 
supplied on an as-is basis and no warranty as to their suitability for any particular purpose is either made or implied. EasySYNC Ltd will 

not accept any claim for damages howsoever arising as a result of use or failure of this product. Your statutory rights are not affected. 
This product or any variant of it is not intended for use in any medical appliance, device or system in which the failure of  the product 
might  reasonably  be  expected  to  result  in  personal  injury.  This  document  provides  preliminary  information  that  may  be  subject  to 
change without notice. No freedom to use patents or other intellectual property rights is implied by the publication of this  document. 
EasySYNC Ltd, Unit 1, 2 Seaward Place, Centurion Business Park, Glasgow, G41 1HH, United Kingdom. Scotland Registered Number: 
SC224924 

 

 

Copyright © 2008-2010 EasySYNC Limited 

The USB2-F-7001 and USB2-F-7101 provide a simple method of adapting CANbus devices to USB.  
The USB2-F-7101adds optical isolation for the CAN interface. 

Flexible mounting options allow the USB2-F-7001 and USB2-F-7101 to be used in a variety of 

applications.  Indicator LEDs provide functional status. 

 

 

 

 

EasySYNC Ltd 

USB2-F-7x01 Full-Speed USB to 1-Port 

CANbus Adapter 

User Guide 

 

Document Reference No.: ES_000005  

Version 1.3 

Issue Date: 2010-05-12 

Summary of Contents for USB2-F-7001












































Reviews: