background image

Instruction Leaflet IL150009EN

Effective December 2019

PXM350-ENC

NEMA 4X rated wall mount enclosure 

for PXM350 series

The PXM350-ENC enclosure offers a mounting option for PXM350 

series energy meters that helps protect from tampering and the 

elements. The enclosure is equipped with DIN rail mounting hard-

ware for easy installation, and a NEMA

®

 4X rating ensures durability. 

The swing panel kit and multiple locking options provide additional 

security from unwanted tampering.

Table 1.  PXM350-ENC specifications

Dimensions

Length

Width

Height

inch

6.0

6.0

4.0

mm

152

152

102

Table 2.  Environmental ratings

Ingress protection (EN 60529)

IP66/IP67

Electrical insulation

Totally insulated

Halogen free (DIN/VDE 0472, part 815)

0

UV resistance

UL 508

Flammability rating

UL 508

Glow wire test (IEC 695-2-1) ºC

960

NEMA class

UL Type 4, 4X, 6, 6P, 12 and 13

Ordering information

Catalog Number: PXM350-ENC

 WARNINGS

HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH.  

 

FOLLOW SAFE ELECTRICAL WORK PRACTICES. SEE NFPA 70ET IN THE U.S., 

OR APPLICABLE LOCAL CODES . 

 

THIS EQUIPMENT MUST ONLY BE INSTALLED AND SERVICED BY  

QUALIFIED ELECTRICAL PERSONNEL. 

 

READ, UNDERSTAND, AND FOLLOW THE INSTRUCTIONS BEFORE  

INSTALLING THIS PRODUCT. 

 

TURN OFF ALL POWER SUPPLYING EQUIPMENT BEFORE WORKING ON OR 

INSIDE THE EQUIPMENT. 

 

USE A PROPERLY RATED VOLTAGE SENSING DEVICE TO CONFIRM POWER 

IS OFF. DO NOT DEPEND ON THIS PRODUCT FOR VOLTAGE INDICATION. 

 

FAILURE TO FOLLOW THESE INSTRUCTIONS WILL RESULT IN DEATH OR 

SERIOUS INJURY.

CAUTION

THIS PRODUCT IS NOT INTENDED FOR LIFE OR SAFETY APPLICATIONS. DO 

NOT INSTALL THIS PRODUCT IN HAZARDOUS OR CLASSIFIED LOCATIONS. 

THE INSTALLER IS RESPONSIBLE FOR CONFORMANCE TO ALL APPLICABLE 

CODES. MOUNT THIS PRODUCT INSIDE A SUITABLE FIRE AND ELECTRICAL  

ENCLOSURE.

PXM350 meter installed; PXM350 meter and PXM350-ENC are ordered separately.

Summary of Contents for PXM350-ENC

Page 1: ...ass UL Type 4 4X 6 6P 12 and 13 Ordering information Catalog Number PXM350 ENC WARNINGS HAZARD OF ELECTRIC SHOCK EXPLOSION OR ARC FLASH FOLLOW SAFE ELECTRICAL WORK PRACTICES SEE NFPA 70ET IN THE U S OR APPLICABLE LOCAL CODES THIS EQUIPMENT MUST ONLY BE INSTALLED AND SERVICED BY QUALIFIED ELECTRICAL PERSONNEL READ UNDERSTAND AND FOLLOW THE INSTRUCTIONS BEFORE INSTALLING THIS PRODUCT TURN OFF ALL PO...

Page 2: ...ipment from drill chips filings and other contaminants when making the wire entry holes and mounting the enclosure to prevent component damage or a future malfunction Use the included mounting hardware to attach the mounting feet to the enclosure Then mount the enclosure to the wall or the panel using either a 4 point or 2 point configuration hardware for mounting to the wall panel is provided by ...

Page 3: ...panel cover can be attached using the enclosed hardware Close the hinged lid and secure the clasp to close Screws are provided to secure the hinged lid Local codes may require this step to prevent opening by unauthorized persons if a locking mechanism is not used For added security the installer may also add a locking mechanism Optional Use included hardware to secure the hinged lid at all four co...

Page 4: ...States Eaton com 2019 Eaton All Rights Reserved Printed in USA Publication No IL150009EN VCG December 2019 Eaton is a registered trademark All other trademarks are property of their respective owners Instruction Leaflet IL150009EN Effective December 2019 ...

Reviews: