5/16 x 2¾ in.
4 mm
Hex Key
Lag Bolts
TV Screws
Extender Brackets
Extender
Screws
Wallplate and Arm
Lag Bolt Washers
TV Washers
Spacers
M4 x 12mm
M6 x 12mm
M6 x 35mm
22mm
M4 x 35mm
M8 x 16mm
M8 x 25mm
M8 x 35mm
M8 x 50mm
2.5mm
M 4/M5
M 6/M8
Stud
Finder
Awl or
Thin Nail
Pencil
Level
Drill
1/2 in.
(13 mm)
7/32 in.
(5.5 mm)
Wood
7 ⅞ in.
(200 mm)
7 ⅞ in.
(200 mm)
5 ⅛ in.
(130 mm)
5 ⅛ in.
(130 mm)
4 in.
(100 mm)
4 in.
(100 mm)
15 ¾ in.
(400 mm)
15 ¾ in.
(400 mm)
13 ⅜ in.
(340 mm)
13 ⅜ in.
(340 mm)
11 ¾ in.
(300 mm)
11 ¾ in.
(300 mm)
Get
ting Star
ted
T
ools Needed
Har
dw
ar
e Included
Does your TV
(including accessories)
weight
more
than 60 lbs. (27 kg) ?
No
— Perfect!
Yes
— This mount is
NOT
compatible.
Please read
through these instructions completely to be sure you’re comfortable with
this easy install process. Also check your TV owner’s manual to see if there are any
special requirements for mounting your TV.
If you do not understand these instructions or have doubts about the safety of the
installation, assembly or use of this product, contact Customer Service at 1-855-428-2490.
CAUTION:
Avoid potential personal injuries and property damage!
●
This product is designed for use in wood stud walls - DO NOT install into drywall alone
●
The wall must be capable of supporting fi ve times the weight of the TV and mount combined
●
Do not use this product for any purpose not explicitly specifi ed by manufacturer
●
Manufacturer is not responsible for damage or injury caused by incorrect assembly or use
FULL-MOTION
TV WALL MOUNT
Model
EGMF
1
x
H
eight
W
idth
W
H
mm
mm
08 x4
x4
05 x2
x2
04 x8
x8
06 x2
x2
07 x1
x1
09 x4
x4
10 x4
x4
11 x4
x4
12 x4
x4
13 x4
x4
14 x4
x4
15 x4
x4
16 x4
x4
18 x8
x8
17 x4
x4
19 x4
x4
01 x1
x1
02 x2
x2
03 x2
x2
03
02
03
02
100 mm = 10 cm ≈ 4 in.
130 mm = 13 cm ≈ 5 1/8 in.
200 mm = 20 cm ≈ 7 7/8 in.
300 mm = 30 cm ≈ 11 3/4 in.
340 mm = 34 cm ≈ 13 3/4 in.
400 mm = 40 cm ≈ 15 3/4 in.
Using the hex key
07
, remove
the screws
[S]
and separate
the faceplate from the arm.
Keep screws for use in
Step 6
.
Measure your TV hole pattern.
Determine which
TV bracket
configuration
A
or
B
to use
based on your
TV hole pattern
measurements
from STEP 2.
If your TV hole pattern is greater than 200 mm x 200 mm
(configuration
B
), attach TV bracket extenders
02
and
03
to faceplate using extender screws
04
.
[S]
60 lbs.
(27 kg)
WARNING:
Exceeding the weight capacity
can result in serious personal injury or damage
to equipment! It is the installer's responsibility
to make sure the weight of the TV (with
accessories) does not exceed 60 lbs (27 kg).
What is your wall made of?
Drywall with
wood
studs?
Not Sure?
Perfect!
Call Customer Service:
1-855-428-2490
?
STEP 1
STEP 2
STEP 3
WARNING:
This product
contains small items that could be
a choking hazard if swallowed.
Before starting assembly,
verify all parts are included and
undamaged. If any parts are
missing or damaged, do not return
the damaged item to your dealer;
contact Customer Service.
Never use damaged parts!
NOTE:
Not all parts and
hardware included will be used.
A
B
04
07
07
