background image

©2005 Edelbrock Corporation
Brochure #63-0399

Catalog #71883

Rev. 05/05

Page 1 of 4

EDELBROCK NITROUS SYSTEMS

“DRY” TO “WET” NITROUS SYSTEM CONVERSION KIT

CATALOG #71883

INSTALLATION INSTRUCTIONS

Please read this instruction sheet thoroughly before beginning installation of your conversion kit.  Please

have your DRY Nitrous System manual available if needed for reference at any time during this installation.

If you have any questions or comments, please feel free to contact our 

Technical Hotline at: 1-800-416-8628

from

7a.m.-5p.m., Monday through Friday, Pacific Time or e-mail us at 

Edelbrock@Edelbrock.com.

BILL OF MATERIALS

Qty. Description

Qty.

Description

1 Performer Fuel Solenoid

1

Nozzle Mounting Collar

1 E1 Nitrous Nozzle

1

3AN 90° 15” Blue Line

2 4AN to 1/8”NPT Fuel Fitting

1

3AN 90° 15” Red Line

1 3AN to 1/8”NPT Fuel Fitting

2

Solenoid Bracket

4 Solenoid Mounting Screws

1

4AN Red 18” Line

5 Various Jets

Summary of Contents for 71883

Page 1: ... for reference at any time during this installation If you have any questions or comments please feel free to contact our Technical Hotline at 1 800 416 8628 from 7a m 5p m Monday through Friday Pacific Time or e mail us at Edelbrock Edelbrock com BILL OF MATERIALS Qty Description Qty Description 1 Performer Fuel Solenoid 1 Nozzle Mounting Collar 1 E1 Nitrous Nozzle 1 3AN 90 15 Blue Line 2 4AN to ...

Page 2: ... on we will be installing components for the wet nitrous system This includes using both the new components that are supplied with this kit as well as re using certain components that were supplied with your dry nitrous system such as one of the nitrous solenoids and the dry nitrous system wiring harness WET COMPONENTS INSTALLATION 1 Using Teflon Paste install the supplied red 3AN to 1 8 NPT fitti...

Page 3: ...of the hood 16 Connect one end of the supplied 18 4AN red line to the INLET fitting of the Performer Fuel Solenoid DO NOT use any type of thread sealant 17 Connect the remaining end of the 18 4AN red line to the 4AN fitting you installed earlier in the test port of the fuel rail DO NOT use any type of thread sealant 18 Using the supplied red 3AN 90 line connect one end to the OUTLET fitting on the...

Page 4: ...er engine damage Fuel Quality Because Nitrous Oxide is an oxidizer fuel selection is critical Both octane and fuel consistency affect fuel burn rate The oxidizer quality of Nitrous Oxide will accelerate the burn rate so we recommend a high quality of gasoline We also recommend you use the same grade of gasoline every time you use your Nitrous Oxide system This will help to maintain the same fuel b...

Reviews: