background image

Installation Instructions for 

Cody 6" Plug-In Picture Light

904-CPL-6-P-01

Install the Fixture

1

CPL-6-_-P

1718 W. Fullerton Ave

Chicago, IL 60614

Tel: 773-770-1195

Fax: 773-935-5613

www.edgelighting.com

info@edgelighting.com

1: 

Rotate the Cody's head perpendicular to the arm making 

    sure the arm is completely inserted into the head. Tighten 
    the M3 set screw on the swivel connector with the provided 
    1.5mm Allen wrench to secure the head in place.

SAVE THESE INSTRUCTIONS!

- This product is ETL listed for indoor location
- This product is wall mounted only.
- This instruction shows a typical installation.

IMPORTANT INFORMATION

A

1

B

3

4

ANCHOR

WALL

2

MOUNTING BRACKET

2: 

Hold the mounting bracket against the wall where Cody 6" 

    will be mounted. Level the mounting bracket and mark the 
    bracket holes on the wall.

3: 

Tap the anchors onto the marked points into the wall up to 

    the threaded portion with a hammer.

4: 

Screw the threaded portion of the anchors in with the a 

    Phillips screwdriver.

NOTE:

 The Cody 6" plug-in comes with 9' of cord and 

plug-in power supply. Make sure there is a power outlet 
near to where Cody 6" will be mounted.

HEAD

ARM

1.5MM ALLEN 
WRENCH

M3 SET SCREW

SWIVEL 
CONNECTOR

1

© 2015 Edge Lighting. All Rights Reserved. 

Reviews: