EESiFlo 6000 Data Logger quick guide
page 1 of 2
EESiFlo 6000 Series
Data Logger Setup Guide
To store data in the internal data logger, activate the EESiFlo 6000 storage function described below. The following
data can be stored:
Date
Time
Identification of the measuring point
Pipe parameters
Medium parameters
Transducer parameters
Sound path (reflection or diagonal)
Transducer distance
Damping factor
Storage rate
Quantity of measurement
Unit of measurement
Measured values
Values of the totalizers (if setup)
Values of the activated process inputs (if any)
Activating and Deactivating the Storage Function
1.
Press the CLR button for 3 seconds and the meter will turn on.
2.
Press the 4 or 6 key to select the OUTPUT OPTIONS program branch then press the Enter button.
3.
Select the channel you wish to setup by pressing the 2 or 8 key then press the Enter button.
4.
Select the Physical Quantity you wish to be displayed by using the 2 or 8 key (Volume flow is the most
common i.e. GPM) then press the Enter button.
5.
Select the Volume value you wish to be displayed by using the 2 or 8 key (US gpm is the most common)
then press the Enter button.
6.
Select the amount of Damping (10 seconds is the most common) then press Enter. Damping is used to
average the sample values taken.
7.
Select Yes at the Store Measured Data screen then press Enter.
8.
Select No at the Serial Output screen then press Enter.
9.
The storage rate is the frequency at which the meter stores the measured values. It is used for storing
the measured data and can be set for each measuring channel independently. Select how often you
wish to have the values stored in memory by using the 2 or 8 key (Every Minute is the most common)
then press Enter.
Note:
If you don't set the storage rate, the default rate or the last rate selected will be used. The storage interval in
seconds should be at least equal to the number of activated measuring channels. (When 2 measuring channels
are activated, the storage rate for a channel should be at least 2 seconds.)
219 East Main Street
Mechanicsburg, PA
USA, 17055
Toll Free: 866-337-4356
Fax: (717) 697-2122