Caution!
•
Disconnect voltage supply and ground all circuits. FAA advisory circulars standards:
latest AC150/5340-26 and AC150/5370-10.
•
In case of non-compliance, do not install.
•
Check that all components are in the plastic bag as per Contents below.
•
Read carefully through the Safety Instructions baled on the resin bag and prepare
yourself accordingly.
•
Do not open the aluminum bag before Step 11 of these installation instructions.
•
In case the resins last date of use is expired or the resin containing aluminum bag is
damaged -
Do not use
the resin.
•
Note: Installation temperature range is +50C to +450
C. Stocking temperature range is
+100C to +400
C.
•
Check
www.efla.net
for possible updates of installation instructions.
Dimensional Data
EFLA Type
Conductor
size [mm
2
]
AWG
Cable diameter
[mm, inch]
Diameter/Length
of assembly
[mm, inch]
KDR600
6
8**
9.0 – 19.0 mm
0.354 – 0.748”
31/270 mm
1.22/10.62”
KDR600.2
10*
6
9.0 – 19.0 mm
0.354 – 0.748”
31/270 mm
1.22/10.62”
*16 mm2 stranded, **up to 19 strands
PRIMARY CONNECTOR KIT
KDR600 series
