Elcontrol VIP CLAMP MINI Series, User Manual

V

V

I

I

P

P

C

C

L

L

A

A

M

M

P

P

M

M

I

I

N

N

I

I

PRECAUTIONS FOR USE

• Never use on networks with voltage higher than 600 V

  in relation to the ground and whose overvoltage category

  is higher than III, i.e. fixed industrial and domestic

  installations (see IEC 664-1).

• Indoor use in environments with a degree of pollution

  of 2 maximum (cf. IEC 664-1), temperature of 0°C to +

  50°C and relative humidity lower than 70%.

• Use accessories compliant with safety standards

  (NF EN 61010-2-031) with minimal voltage of 600 V

  and overvoltage category III.

• Never open the clamp box before disconnecting all

   power sources.

• Never connect to the circuit to be measured if the clamp

  box is not properly closed.

• Before any measurement, check the proper positioning

  of the cables and switch.

• When measuring current check for proper alignement

   of  the conductor in relation to the markers and proper

   closing of the jaws.

• Always disconnect the clamp from any power source

  before changing the battery.

• Do not perform resistance tests, continuity tests or semi-

  conductor tests on a circuit under power.

USER MANUAL

Thank you for purchasing this 

“VIP CLAMP

MINI” series multimeter clamp

.

To get the best service from this instrument:

_ 

read 

this user’s manual carefully,

_ 

respect 

the safety precautions detailed

Via Vizzano,44 - 40037 Pontecchio Marconi (Bologna) Italy

Tel.+39 0516782006 – Fax +39 051845544

......................................................................................

 http://www.elcontrol-energy.net

 e-mail (Comm.le Italia) vendite@elcontrol-energy.net

 e-mail (Sales Dept.)      sales@elcontrol-energy.net

English