background image

EVF-1152D/64-FG

Single 15” Two-Way

60° x 40° Full-Range

Fully-Weatherized

Loudspeaker System

General Description:

Technical Specifications:

Key Features:

Fully-weatherized fiberglass finish with gland nut 

• 

and stainless-steel grille 
DH7N 3” (76 mm) diaphragm, 1.4” (36 mm) exit 

• 

pure titanium compression driver
DVX3151A 15” (381 mm) LF transducer with fully 

• 

symmetric drive
Advanced fourth-order crossover network with 

• 

HF protection
Coverage pattern: 60° x 40° Constant 

 

• 

Directivity

TM

 12” rotatable waveguide

100 dB sensitivity, 134 dB maximum SPL

• 

System rating: 600 W continuous, 2400 W peak

• 

Active rating: LF 500 W/HF 75 W continuous 

• 

(2000 W/300 W peak)
(22) M10 threaded suspension points

• 

The Electro-Voice EVF-1152D/64-FG is a fully-weatherized, fiber-

glass-coated, high-power, two-way loudspeaker system that can be 

used in a variety of applications where high-quality sound reinforce-

ment is required in a compact, lightweight package.

The EVF-1152D/64-FG utilizes the DH7N, a high-output 3” titanium 

compression driver, coupled to a Constant Directivity™ 60° x 40° 

waveguide. The DVX3151A 15” woofer was developed using FEA 

optimization for motor, suspension, and electrical design to ensure 

very low distortion, high efficiency, and maximum intelligibility at high 

SPL. The crossover uses steep, 24-dB-per-octave slopes with equal-

ization for very smooth response in the vocal range, linear off-axis 

response, and a protection circuit for long-term reliability.

The EVF-1152D/64-FG’s features make it ideal for many fixed-install 

applications, including applications with full exposure to outdoor 

elements. The trapezoidal enclosure is constructed of weather-resis-

tant birch, and coated with fiberglass for maximum protection from 

extreme outdoor elements. The unique acoustic and rigging design 

allows for vertical and horizontal clusters to be built using any 

combination of loudspeakers from the entire EVF and EVH series. 

With seven horn patterns to choose from, along with an assortment 

of low-frequency and subwoofer loudspeakers, you have the tools to 

maximize flexibility of system design, no matter what the application 

and budget. The innovative input panel provides a choice of Phoenix-

style connector (included in all standard models) or the ability to add 

a dual NL4-type connector cover plate or gland-nut cover plate (for 

weatherizing applications). An externally accessible jumper selects 

passive or active operation. An available 70.7/100-V transformer 

kit may be easily mounted to the input panel for use in distributed 

systems. All these features give you the flexibility to address a large 

range of venues, quickly and precisely supporting customer require-

ments with fewer items in inventory.

Freq. Response

1

 (-3 dB): 107 Hz - 18 kHz

Freq. Range

1

 (-10 dB): 58 Hz - 21 kHz

Rotatable Coverage: 60° x 40°

Rec. High-Pass Frequency: 55 Hz

Passive Crossover Freq.: 1300 Hz

Axial Sensitivity

1

: 100 dB (1 W/1 m)

Max. Calculated SPL

1

: 134 dB

Passive Power Handling

2

: 600 W continuous, 2400 W peak

Impedance: 8 ohms (nominal), 6.0 ohms (min.)

LF Transducer - DVX3151A, 15” (381 mm) driver

LF Axial Sensitivity

4

: 100 dB (1 W/1 m)

LF Max. Calculated SPL: 133 dB

LF Power Handling

3

: 500 W continuous, 2000 W peak

LF Impedance: 8 ohms (nominal), 7.2 ohms (min.)

HF Transducer - DH7N, 3” (76 mm) diaphragm compression driver

HF Axial Sensitivity

4

: 113 dB (1 W/1 m)

HF Max. Calculated SPL: 138 dB

HF Power Handling

3

: 75 W continuous, 300 W peak

HF Impedance: 8 ohms (nominal), 6.0 ohms (min.)

Connectors: Dual four-pin 10 AWG Phoenix/Euro Block 

screw-terminals, CDG dual-gland-nut input 

panel cover included for weatherizing

Enclosure: 13-ply weather-resistant birch with fiberglass 

finish

Grille: 18 GA stainless steel with hydrophobic cloth

Environmental: IEC 60529 IP55

Suspension: (22) M10 threaded suspension points

Dimensions

(H x W x D):

30.26” x 18.50” x 18.37”

(768.6 mm x 469.8 mm x 466.6 mm)

Weight: 75.7 lb (34.4 kg) net, 86.0 lb (39.1 kg) shipping

1

 Half-space measurement.

2

 EIA RS-426A, tested for eight hours.

3

 AES 2-1984, tested for eight hours.

4

 Arithmetic averages, 300 - 1,300 Hz (LF) and

  1,300 - 5,000 Hz (HF).

Summary of Contents for EVF-1152D/64-FG

Page 1: ...h seven horn patterns to choose from along with an assortment of low frequency and subwoofer loudspeakers you have the tools to maximize flexibility of system design no matter what the application and budget The innovative input panel provides a choice of Phoenix style connector included in all standard models or the ability to add a dual NL4 type connector cover plate or gland nut cover plate for...

Page 2: ...l Up 20 50 100 1000 10000 20000 70 80 90 100 110 Frequency Hz SPL dB 1W 1m On Axis 10 Vertical Down 20 Vertical Down 30 Vertical Down 20000 10000 1000 100 20 0 10 20 30 1 10 100 1000 Frequency Hz Directivity Index DI dB Directivity Factor Q 20 100 1000 10000 20000 360 100 20 3 6 Horizontal Vertical Frequency Hz 6dB Beamwidth degrees 50 Frequency Response Impedance Beamwidth Directivity Block Diagr...

Page 3: ...lar Plots 1 3 Octave Engineering Data Sheet Horizontal Black Vertical Grey 400 Hz 500 Hz 630 Hz 800 Hz 1 kHz 2 5 kHz 2 kHz 3 15 kHz 4 kHz 5 kHz 1 25 kHz 1 6 kHz 6 3 kHz 8 kHz 10 kHz 12 5 kHz 16 kHz 20 kHz ...

Page 4: ...02 HRK 2W horiz rigging kit EVF SUB white ACC000091 001 HRK 3B horiz rigging kit EVH black ACC000091 002 HRK 3W horiz rigging kit EVH white ACC000092 001 VRK 1B vert rigging kit EVF black ACC000092 002 VRK 1W vert rigging kit EVF white ACC000093 001 VRK 2B vert rigging kit EVF SUB black ACC000093 002 VRK 2W vert rigging kit EVF SUB white ACC000094 001 VRK 3B vert rigging kit EVH black ACC000094 00...

Reviews: