PROFESSIONAL LAUNDRY
W4280X
W4350X
W4600X
28/62
35/77
60/135
280
350
600
830
920
980
805
650
630
300
220
220
-
25
40.8
x
x
x
x
x
x
**
49
**
45
**
308/-
313/62
375/- 598/105
703/-
0.35/-
0.5/2.4
0.5/-
2.1/5.4
2.1/-
7.3
-
9.5
-
16
Washer extractors
W4280X, W4350X, W4600X
Features and benefits
•
Clarus Control
®
with:
– Fully programmable microprocessor
– All relevant wash parameters can be programmed
– Programming from key pad or downloading via memory card
• Large door opening for easy loading/unloading
• Super Balance, software ensure a quick
distribution/extraction cycle with low noise/vibration level
• Frequency controlled motor
• Prepared for manual or automatic detergent supply
• Stainless steel in all vital parts for high degree of rust protection
• Stainless steel front panels and powder painted side panels
• Non-heated or direct steam heating
• Electrical heating (only W4350X, W4600X)
Main options
• Stainless steel panels
• Coin-meter (only W4280X, W4350X)
• Five compartment supply injector (only W4600X)
• Third water inlet valve (only W4600X)
Certified in accordance with ISO 9001 and ISO 14001 and approved IP 24D.
Main specifications
Rated capacity, filling factor 1:10
kg/lb
Drum,
volume
litre
diameter
ø mm
Extraction max
rpm
G-factor
Heating alternatives
, 230/400V
electricity
kW
steam
non-heated
Consumption data ”Normal 60°C” 1:10*
Total time
min
Water consumption (cold/hot)
litre
Energy consumption (motor/heating)
kWh
Steam consumption
kg
Steam
El
Steam
El
Steam
* Water temperature 15°C cold water and 65°C hot water.
** Depending on steam pressure.
Images shown are a representation of the product only and
variations may occur.
