background image

 

 

 

MODEL

  

PR2000S 

(MYLOX PORTABLE/DESKTOP PRINTER) 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

 

   

 

OPERATION

The printer is powered by an external 12V DC 3.3Amp universal 
power supply that charges the internal 2200mA Lithium battery 
pack. The power supply can ‘auto switch’ to directly power the 
printer  without  the  battery  pack  installed  or  should  the  battery 
pack become discharged. 
The printer can also operate from a 12V DC vehicle aux. output. 

Summary of Contents for PR2000S

Page 1: ... 12V DC 3 3Amp universal power supply that charges the internal 2200mA Lithium battery pack The power supply can auto switch to directly power the printer without the battery pack installed or should the battery pack become discharged The printer can also operate from a 12V DC vehicle aux output ...

Page 2: ...kes the printer during battery save mode Green Power on Amber Error Off Printer Off in sleep mode The battery pack included will have only a limited charge on installation We recommend ensuring an initial 8 to 12hr charge be provided using the included power supply The printer can be used during the charging period ...

Page 3: ...t Number AT4044 Serial Data Cable Connection The printer is supplied with a dedicated serial data cable featuring an 8pin sub mini connector This is the same shape as the mini USB connector that uses a 5 pin configuration DO NOT USE A SUB MINI USB CABLE It will not fit The D9 connector has the following pin signals suitable for PC connection Pin No Signal Name Function Printer Host 1 3 RxD Receive...

Page 4: ...ake a request for repair The correct voltage is being supplied to the printer The Status LED is green The printer has paper and that the roll is correctly fitted Baud Rate Comms protocol is correctly configured to the host equipment Parameters can be verified on the Self Test print Default Baud rate for printer is 9600Bd 8 N 1 Hardware handshaking Initial diagnostic assistance can be provided over...

Reviews: