background image

RolMotion M Roller Blind Drive 

138251001_EN_1219 

RolMotion M Roller Blind Drive 

Operating and assembly instructions 

Follow these instructions for safe and proper use. Observe 

all assembly instructions. Incorrect assembly can lead 

to serious injuries. Please keep this operating manual 

for future reference to ensure that it can be accessed 

throughout the entire service life of the product! 

The German operating manual is the original version. 

All documents in other languages are translations of the 

original version. 
All rights reserved in the case of patent, utility model or 

design registrations. 

General information on these 

instructions 

The content structure is based on the life cycles of the electric 

motor drive (hereinafter referred to as “the product”). 

The manufacturer reserves the right to make changes 

to the technical data in these operating instructions. In 

some cases, this technical data may differ from those of 

the respective product version; however, the functional 

information will not undergo significant changes or become 

invalid. The current version of the technical specifications 

may be requested from the manufacturer at any time. 

No claims may be asserted against the manufacturer 

as a result of this provision. Deviations from textual or 

visual statements may occur depending on the product's 

technical development, features and accessories. Deviating 

information for special versions will be provided by the 

manufacturer in the sales documentation. Other information 

shall remain unaffected by these provisions. 

2.1  Standards and guidelines 

During construction, the fundamental health and safety 

requirements were applied and provision was made for the 

appropriate legislation, standards, directives and guidelines. 

The safety of the product is confirmed by the declaration 

of conformity (see EC Declaration of Conformity). All 

information relating to safety in these operating instructions 

refers to the laws and regulations that are currently valid 

in Germany. All information in these operating instructions 

must be complied with at all times and without limitation. In 

addition to the safety notes in these operating instructions, 

the regulations on accident prevention, environmental 

protection and occupational health and safety applicable at 

the location of use must be observed and adhered to. The 

regulations and standards for safety assessment can be 

found in the EC Declaration of Conformity. 

Contents

Operating and assembly  

instructions  

1

General information on these instructions   1

2.1 

Standards and guidelines  

1

2.2 

Intended use  

2

2.3 

Foreseeable misuse  

2

2.4 

Warranty and liability  

2

2.5 

Customer service provided by the manufacturer  2

Safety  

2

3.1 

General safety instructions  

2

3.2 

Layout of safety instructions  

2

Product description  

3

4.1 

Product contents  

3

4.2 

Accessories  

3

Assembly  

3

5.1 

Mechanical fastening  

4

5.2 

Electrical connection  

4

5.3 

Connection example for RolMotion M  

230 V / 50 Hz  

5

5.4 

Parallel circuit  

5

5.5 

Commissioning  

5

5.5.1  Connection for assembly cable  

5

5.6 

Setting the end positions  

5

5.6.1  Changing/deleting the end positions  

5

5.6.2  Four variants of end position settings  

5

5.6.3  Variant A:  Upper and lower end position  

freely adjustable  

 

6

5.6.4  Variant B:  Fixed upper limit stop, lower end  

position freely adjustable  

 

6

5.6.5  Variant C: Fixed upper and lower limit stop  

6

5.6.6  Variant D:  Upper end position freely  

adjustable, fixed lower limit stop  

6

5.7 

Placement of roller blind slats  

7

Travel profiles  

7

6.1 

Travel profile default mode  

7

6.2 

Travel profile whisper mode  

7

Troubleshooting  

7

Servicing  

7

Service/manufacturer's address  

7

10 

Repairs  

7

11 

Disassembly and disposal  

7

12 

Comments on EU Declaration of Conformity  8

13 

Technical data and dimensions  

8

13.1  RolMotion M  

8

Summary of Contents for RolMotion M











Reviews: