Roller shutter drive RolTop /D+ 868/915
138172801_EN_0614
Roller shutter drive RolTop /D+ 868
1
Operating and installation
instructions
Please keep these operating instructions for later use, to be
available throughout the life of the product!
The German manual is the original version.
All other documents represent the language translations of
the original text.
All rights in the case of a patent, utility model or ornamental
design registration are reserved.
2
General for instructions
The content structure is based on the life cycles of the elec-
tric motor drive (hereinafter referred to as "Product").
The manufacturer reserves the right to make changes to
the Speci
fi
cations stated in these Operating Instructions
at any time. These may, in individual cases, be different
from the respective product version, however the functional
information will not undergo signi
fi
cant changes or become
invalid. The current version of the Speci
fi
cations may be
requested from the manufacturer at any time. No claims
may be asserted against the manufacturer as a result of the
preceding sentence. Deviations from text or picture state-
ments are possible and depend on the technical develop-
ment, features, and accessories of the products. Deviating
information on special versions will be explained by the
manufacturer in the sales documentation. Other information
shall remain unaffected by these provisions.
2.1
Standards and Directives
During the design process, the basic health and safety
requirements of the applicable laws, Standards and Direc-
tives were complied with. The safety is con
fi
rmed by the
declaration of conformity (see "Declaration of Conformity").
All safety information in these Operating Instructions refer
to the laws and regulations currently applicable in Germany.
All instructions in the Operating Instructions shall be ob-
served without limitation and at any time. Beside the safety
instructions contained in these Operating Instructions, the
provisions for accident prevention, environmental protection
and occupational safety, which are applicable for the op-
erating site, must be observed. Provisions and Standards
for the safety rating can be found in the EC Declaration of
Conformity
2.2 Intended
use
The product is intended for use in façade engineering to
drive electrically powered roller shutters.
The determining factor for the drive is the elero drive com-
putation program
(http://elero.com/
de;service;antriebsberechnungsprogramm.htm)
.
Further
fi
elds of application have to be arranged with the
manufacturer,
elero
GmbH Antriebstechnik (see Address).
The operator will be solely responsible for damages result-
ing from improper use of the product. The manufacturer
cannot be held liable for personal or material damages
caused by misuse or procedural errors, and by improper
operation and commissioning.
The product may be operated only by trained and author-
ized personnel under observance of all safety.
Table Of Contents
1
Operating and installation
instructions
1
2
General for instructions
1
2.1
Standards and Directives
1
2.2
Intended use
1
2.3
Foreseeable misuse
2
2.4
Warranty and liability
2
2.5
Customer service of the manufacturer
2
3 Safety
2
3.1
General safety instructions
2
3.2
Layout of the safety guidelines
2
4
Product description
3
5 Assembly
3
5.1
Mechanical fastening
4
5.2
Electrical connection
4
5.3 Connection
example,
RolTop /D+ 868 230 V/50 Hz
4
5.4
Initial operation
5
5.4.1 Connection for cable assembly
5
5.4.2 Connection for radio
(transmission operation)
5
5.4.3 Changing / Deleting the end positions
5
5.4.4 Programme or delete further curtain
positions
5
5.5
Programming the transmitter
5
5.6
Programming (additional) transmitter
5
6 Troubleshooting
6
7 Maintenance
6
8 Repair
6
9
Manufacturer's address
6
10
Disassembly and disposal
6
11
Notes on the EC declaration of conformity 7
12
Technical data and dimensions
7
