background image

Page 1

091321

1-888-651-3431

2000 lb. Sidewind  

A-Frame Turbo Jack

Instructions for Part #Sidewind-Jack-2000

GENERAL GUIDELINES & SAFETY

• It is the user’s responsibility to read and follow all instructions
• Keep these instructions with the product at all times and review before each use
• It is the responsibility of this product’s owner to furnish the instructions to any person that borrows 

or purchases the product

• Inspect the product before use to ensure it is assembled properly and all parts are in safe working 

order and free of defects

• Never modify this product in any way
• All circumstances cannot be addressed in these instructions 
• Please use common sense and practice general safety measures when using this product
• Parts and/or instructions are subject to change without notice
• Unauthorized modification may impair the function and/or safety and could affect the life of the 

equipment. There are specific applications for which the jack was designed

• Always check for damaged or worn out parts before using the jack. Broken parts will affect the 

jack operation. Replace or repair damaged or worn parts immediately

• Do not force the trailer jack 
• Do not attempt to lift more than the maximum lifting capacity of 2000 lbs. 
• Never attempt to adjust the drop leg when there is any load on the jack. When using the drop foot 

or drop leg, make certain the supplied pin is fully inserted through both sides of the inner tube and 

the drop tube before using the jack

Summary of Contents for Sidewind-Jack-2000






Reviews: