background image

VEHICLE  ALARM  SYSTEM  'ELITA  E50'

User  Manual

'ELITA  E50'

  

is   up - to - date   vehicle   alarm   system   designed   for   users   looking 

 

for  quality  and  appreciating  their  time.  System  generates  

secure  variable  code  and  functions  in  conformity  to  the  requirements 

 

of  EU  Directives.  

'ELITA  E50'

 

 

is  distinguished  not  only  by  the  reliable  

engine  immobilization  preventing  vehicle  theft  but  also  by  possibility  of  turning  the  alarm  OFF  by  means  of  adjustable  PIN  code.  This 

 

is  

extremely  handy  when  facing  remote  control  loss  for  example  during  some  travel  or  when  the  remote  control  battery  is  low.

1. SYSTEM   UNIT.

System  unit  performs  main  security  functions,  thus  it  is  extremely  important  to  hide  it  well  in  the  passenger  compartment  of  a  vehicle.  After  
the  installation  of  the  system  unit  all  system  settings  and  pre-programming  of  the  new  remote  controls  is  done  by  using  the  PIN  code.  
Manufacturer   supplies   alarm   system   with   default   4 - digit   PIN   code   (Fig.   1)   that   can   be   found   on   the   Identification   label   of   alarm   system   
(Fig.   2).   Afterwards   the   user   should   change   it   into   some   other   easy   memorable   4 - digit   number.   It   is   recommended   to   write   down   the   new   
PIN  code,  however  do  not  keep  this  information  in  your  vehicle.  In  addition,  do  not  use  

 your   

birthday  date  or  home  address  for  the  PIN  

code.

2. REMOTE   CONTROL.

The  system  comes  with  2  remote  controls  (radio  transmitters)  (Fig.  3)  though  it  is  possible  to  program  up  to  5  remote  controls  (see  section  
6.4.).  It  is  recommended  to  replace  remote  control  battery  after  every  12  months.  All  types  of  23A  batteries  (12V)  are  eligible  for  use.  
Though

 

 remote 

 

control  casing  ensures  protection  of  inside  electronics  from  moisture,  dipping  of  remote  control  device  into  water  is  not  

allowed  under  any   circumstances. 

3. ALARM   

ARMING

  USING  REMOTE  CONTROL  BUTTON          .

3.1. ALARM   ARMING.

  Shortly  press  remote  control  button   

.  Vehicle  direction  indicators  flash  once,  system  LED  starts  flashing  in  short  

bursts  of  light.  Security  alarm  is  turned  ON.  If  vehicle  incorporates  central  lock,  the  doors  are  locked.

3.2. ARMING  WITH  NO  SENSOR.

  In  case  the  system  is  connected  with  single-level  sensor,  press  and  hold  button   

.  Direction  indicators  

will  flash  once,  after  2  seconds  direction  indicators  will  shortly  go  on  once  more.  Release  the  button.  Protection  is  ON,  however  the  sensor  
detecting  vehicle  body  vibrations  or  movements  inside  the  passenger  compartment  is  deactivated  and  does  not  trigger  the  alarm  system.

  

Vehicle

 

 doors,

 

 luggage   compartment   and   engine   hood   are   secured

!

  If  the  system  is  connected  with  two-level  sensor  and  you  want  to  turn  on  

the  security  without  triggering  sensor  warning  signal,  press  and  hold  button

   

.  The  direction  indicators  will  flash  once,  after  2  seconds  the  

direction   indicators   will   go   ON.   Release   the   button.   If   you   wish   to turn   the   arming   ON   without   a   sensor - press   and   hold   the   button    

.   

Vehicle  direction  indicators  flash  once,  after  2  seconds  direction  indicators  will  shortly  go  on  once  more.  Release  the  button  only  with  
direction  indicators  in  the  off  position.

3.3. ALARM   INTERRUPT

.  System  alarm  starts  generating  noise  (warning)  in  case  of  vehicle  door,  engine  bonnet  or  luggage  compartment  

opening,  body  movement  or  passenger  compartment  break-in  when  alarm  is  operational.  Press  remote  control  button   

  to  terminate  

alarming  yet  the  security  system  remaining  operational.  If  you  want  to  turn  OFF  the  response  to  vibration  or  volume  sensor  till  the  next  
rearming,  perform  actions  in  section  3.2.

3.4. CLOSING  WINDOWS  AND  SUNROOF  ON  ARMING

.  Installation  of  'ELITA  E50'  enables  system  setting  in  a  way  the  system  

generates  a  40  second  pulse  designed  for  closing  of  windows  and  sunroof.  

In  case  of  holding  any  of  the  buttons

   

 

 during   impulse 

 

generation,  the  latter  will  be  discontinued.

3.5. CENTRAL  LOCK  CONTROL  WITH  ENGINE  OPERATIONAL.

  If  doors  of  the  vehicle  are  closed  and  the  engine  is  ON,  doors  are  

locked  with  first  press  of  button   

  and  unlocked  with  the  second  press.  Very  handy  when  travelling  with  children  or  heating  vehicle.

3.6. AUTOMATIC  DOOR  LOCKING  ON  START  UP  OF  THE  ENGINE.

  The  driver  will  definitely  feel  safer  if  the  doors  are  locked  

automatically  on  the  start  of  the  engine.  After  turn  OFF  of  the  engine  the  doors  are  unlocked.  To  turn  automatic  door  lock  ON  or  OFF  
disarm  the  system  or  turn  OFF  the  engine,  simultaneously  press   

  and   

  buttons  and  hold  them  till  a  short  alarm  signal.

3.7. CHECKING  WHETHER  THE  SYSTEM  IS  ON.

  Press  remote  control  button   

.  If  the  system  is  armed,  vehicle  direction  indicators  

flash  once.

3.8. VEHICLE  LOCATOR,  PANIC  AND  EMERGENCY  CALL  FUNCTION.

  If  the  system  is  armed,  press  and  hold  remote  control  

button   

.  Direction  indicators  flash  once,  1.5  seconds  afterwards  the  siren   starts  sounding.  The  function  can  be  used  for  locating  your  

vehicle  in  a  big  parking  lot,  for  warning  nosy  parkers,  or  attracting  attention  of  by  passers  in  case  of  emergency.

4.DISARMING  WITH  REMOTE  CONTROL  BUTTON          .
4.1. DISARMING.

  Shortly  press  remote  control  button   

.  Direction  indicators  flash  twice,  system  LED  goes  OFF.  Security  system  is  

turned  OFF.  If  vehicle  incorporates  central  lock,  the  doors  are  unlocked  automatically.

4.2. CONTROL   OF   OPTIONAL   DEVICES.   

Installation  features  enables  'CODEperfect  E50'  wiring  in  a  way  the  system  generates  a  pulse  

by  pressing  button   

  for  over  2  seconds.  Duration

 

 of  the  pulse  equals  to  duration  of  the  button  pressing.  The  pulse  is  designed  for  control  

of  electromechanical  engine  hood  or  luggage  compartment  release  catch.

5. CONTROL   OF   OTHER   DEVICES.

5.1. OPENING   LUGGAGE   COMPARTMENT.   

If  construction  of  your  luggage  compartment  is  suitable,  it  can  be  pre-programmed  during  

installation  to  open  automatically  when  pressing   

  button  for  2  seconds.  For  this  purpose  could  be  used  three  or  four-button  remote  

control,  which  can  be  pre-programmed  to  vehicle  alarm  system.  If  arming  is  turned  on  the  system  will  not  respond  to  luggage  compartment  
opening  and  sensors,  therefore  doors  will  be  locked.  When  closing  the  luggage  compartment  system  will  return  to  arming.

M

M

M

M

M

M

M

M

I

M

M

I

I

Disarming
Engine imobilization OFF
Device  Control

Alarm  Interrupt
Sensor  Deactivation
Central  Lock  Control
Arming  Verifivation
Emergency  Call

Arming

Fig.  3    Two - button  remote  control.

Fig. 1  The PIN code

PIN  code

Label

Fig. 2  The Identification label.

Reviews: