Betta Cube
QUICK SETUP GUIDE
Item #s 01031, 01032, 01033
ASSEMBLY
Check to make sure none of the kit components are
damaged before setup. If damaged parts are discovered
call 1-855-ELIVE18 or email elivesupport@elivepet.com
for customer support. Do not return the product
directly to the retail store.
Rinse the aquarium with cold tap water. Do not use
any soaps or detergents to clean the aquarium.
Add a background
(Optional)
If you wish to apply a background to your Betta Cube
go to eliveproducts.com and go to the Betta Cube
product page. Follow the online instructions
to complete this step.
Location.
Place the aquarium on a solid level surface, out of
direct sun light, and away from heating/air
conditioning vents
.
DECORATING
AND FILLING
THE AQUARIUM
Decorate the aquarium
Rinse aquarium gravel, marbles, and any other
aquarium-safe décor you would like to add (all sold
separately) with cold tap water before adding them to
the aquarium. Do not use any soaps or detergents to
clean items placed into the aquarium.
Fill the aquarium
with dechlorinated,
room temperature water
Do not fill the aquarium all the way. Slowly fill with
water and leave at least a 1/2 inch gap between
the water’s surface and the top of the aquarium.
See Figure 1.
ADD BETTA FISH
AND INSTALL
AQUARIUM COvER
Once you are sure the water temperature in the
aquarium has reached room temperature you may
add one Betta fish to the aquarium. The Beta Cube
is intended for one Betta fish. Position the cover
securely on the aquarium.
(See figure 2.)
The round holes in the cover can be used for
feeding the Betta. The aquarium cover also includes
notches on the back side for routing optional airline
tubing or heater power cords.
(See figure 3.)
PARTS
A
– Cube aquarium
B
– Aquarium cover
A
B
Fig. 2
Fig. 1
Secure cover
Fig.3
Betta feeding
hole
Notches for
tubing or cord
routing
1
.
2
.
3
