Mega 100
Classic
EL Inverter User Manual
Congratulations on your purchase of a Mega 100 Classic EL Inverter, the first EL inverter
designed and built in the USA! Let’s get you started.
Front Panel
(Shown with silicone case removed)
Power Socket Receptacle for 12V DC in via standard 5.5mm barrel plug.
Power Switch Turns the inverter on and off
Mode Button Cycles through modes
Speed button Adjusts speed of Blink Mode and Fade Mode
LED Flashes green, red or amber to indicate status
EZ Snap Connector High Voltage AC out to Electroluminescent element.
Power Supply
The Mega 100 inverter has a socket which accepts the standard 12V 5.5mm barrel plug.
Do not force the use of a connector that does not fit, it could damage the inverter.
The Mega 100 inverter requires a robust power supply in order to operate properly. For AC wall
adaptors we recommend a minimum rating of 12V 1 Amp.
