Cala KNX MultiTouch T push button
1
Cala KNX MultiTouch T push button
• Version: 03.02.2021 • from version 0.1.9 • Technical changes and errors excepted. • Elsner Elektronik GmbH • Sohlengrund 16 • 75395 Ostelsheim • Germany • www.elsner-elektronik.de •
Technical Service: +49 (0) 7033 / 30945-250
EN
Cala KNX MultiTouch T Light/Sunblind
Cala KNX MultiTouch T Light/Scenes
Cala KNX MultiTouch T Light
Button for light, drive, scenes
and temperature control
Technical specifications and installation instructions
1.
Description
The
Cala KNX MultiTouch T push button
has touch-sensitive buttons with
which functions can be called up in the KNX building bus system. The glass surface
is printed with areas for setting the light and temperature. Coloured LEDs (one white
LED in the light symbol, one red and one blue LED in the thermometer symbol and
three white LEDs each for level indication) are integrated in these areas and their be-
haviour can be adjusted. With
Cala KNX MultiTouch T Light/Sunblind
, an area
for moving blinds/sunshades (up/down) is added, and with
Cala KNX MultiTouch
T Light/Scenes
, an area for calling up scenes (3 scenes).
A temperature sensor is integrated into
Cala KNX MultiTouch T
. An external tem-
perature reading can be received via the bus and processed with its own data to
create a total temperature (mixed value).
The
Cala KNX MultiTouch T
has a PI controller for heating and cooling. The set-
point temperature can be changed using the "+" and "-" touch buttons.
Communication objects can be linked via AND and OR logic gates.
The device is supplemented with a frame of the switch series used in the building,
and thus fits seamlessly into the interior fittings.
Functions:
•
Operating zone for light
with 3 areas (switching and dimming)
•
Operating zone for temperature control
with 3 areas (warmer, cooler,
changeover heating/cooling)
•
A total of 9 areas, all of which can be assigned either to the intended bus
functions or to other individual bus functions (switches, changeover
switches, dimmers, blinds, awnings, shutters, windows, 8- or 16-bit encoders,
scene call/saving)
•
LEDs
can be set. All LEDs Off, all LEDs On, active LEDs Always On, all LEDs
On for specific time after button pressed, active LEDs On for specific time after
button pressed. Settable, as to whether LED flashes at block object value = 1.
LED brightness can be pre-set for day and night
•
Area function
when touching two or more push buttons. Can be configured
as switch, selector switch, as 8 or 16 bit encoder or for scenario recall
•
Scene control.
3 scene channels with 5 objects each
•
Temperature
measurements.
Mixed value
from own measured value and
external values (proportion can be set by percentage), output of minimum
and maximum values
•
PI-controller for heating
(one or two-level) and
cooling
(one or two-level)
according to temperature. Regulation according to separate setpoints or
basic setpoint temperature
•
4 AND and 4 OR logic gates
each with 4 inputs. All switching events as
well as 8 logic inputs (in the form of communications objects) can be used as
inputs for the logic gates. The output from each gate can be configured
optionally as 1-bit or 2 x 8-bit
Additional functions Cala KNX MultiTouch T Light/Sunblind:
•
Operating zone for blinds
, awnings, shutters or windows with 3 areas (up/
down with short/long distinction, driving position)
Additional functions Cala KNX MultiTouch T Light/Scenes:
•
Operating zone for scene call and saving
with 3 areas for scenes
Configuration is made using the KNX software ETS 5. The
product file
can be dow-
nloaded from the ETS online catalogue and the Elsner Elektronik website on
www.elsner-elektronik.de
in the “Service” menu.
1.0.1. Area function
If the area function in ETS has been activated, another function is available alongsi-
de the regular key functions. This is triggered by touching multiple keys, e.g. if you
touch the sensor with the palm of your hand.
Using the area function
If a key is pressed and another (different) key is touched within 0.2 seconds, the ac-
tion set in the ETS is performed for the area operation (See Fig. 1 a) and b)). The keys
are then blocked for 0.5 seconds.
Using the normal key function
If a key is pressed and no other key is touched within 0.2 seconds, the normal key
function is enabled/provided for 5 seconds (See Fig. 1 c) and d)). This is extended
for 5 seconds with each push of the button.
If the area function in the ETS is disabled, the keys can be used normally at any time.
1.0.2. Scope of delivery
•
Push button in casing
•
Base plate
Additionally
required (not included in the deliverables):
•
Junction box Ø 60 mm, 42 mm deep
•
Frame (for insert 55 x 55 mm), compatible to the switch scheme used in the
building
1.1. Technical data
The product is compliant with the provisions of EU Directives.
1.1.1. Accuracy of the measurement
Measurement variations from permanent sources of interference (see chapter
Ins-
tallation position
) can be corrected in the ETS in order to ensure the specified accu-
racy of the sensor (offset).
When
measuring temperature
, the self-heating of the device is considered by the
electronics. The heating is compensated by the software.
2.
Installation and commissioning
2.1. Installation notes
Installation, testing, operational start-up and troubleshooting should
only be performed by an electrician.
Cala KNX MultiTouch T
Light/Sunblind:
Item numbers
70890 (white),
70892 (black)
Cala KNX MultiTouch T
Light/Scenes:
Item numbers
70960 (white),
70962 (black)
Cala KNX MultiTouch T
Light:
Item numbers
70950 (white),
70952 (black)
Casing
Genuine glass, plastic
Colours
• similar to RAL 9010 pure white
• similar to RAL 9005 deep black
Assembly
Flush-mounted (wall installation in junction box
Ø
60 mm, 42 mm deep or cavity wall socket for
burr hole
Ø
68 mm)
Degree of protection
IP 20
Dimensions
Housing approx. 55 x 55 (W x H, mm),
Installation depth approx. 10 mm,
Base plate approx. 71 x 71 (W x H, mm)
Total weight
approx. 50 g
Ambient temperature
Operation and storage -25…+85°C
Ambient humidity
max. 95% RH, avoid condensation
Operating voltage
KNX bus voltage
Bus current
max. 19 mA
Data output
KNX +/- Bus plug-in terminal
Group addresses
max. 205
Assignments
max. 205
Communication
objects
Cala KNX MultiTouch T Light/Sunblind: 199
Cala KNX MultiTouch T Light/Scenes: 198
Cala KNX MultiTouch T Light: 198
Temperature measu-
rement range
-25…+85°C
Temperature resolu-
tion
0.1°C
Key function readiness
Key function readiness
Fig. 1
0s
0.2s
5.2s
Key Y
Key X
Key X
Design
Function Y
Key function readiness
Area function
Examples of normal key functions
0.5 s block
Key X
Design
Area function
Key Y
Design
Function X
a)
b)
c)
d)
Key X
Key Y
0.5 s block
Design
Area function
Area function examples
readiness
