ZAKŁAD PRODUKCJI URZĄDZEŃ ELEKTRONICZNYCH „ELSTER” Sp.J.
Obłaczkowo 150, 62-300 Września, Polska
www.elster.w.com.pl mail: elster@post.pl
fax: +48 61 43 67 690 tel.: +48 61 43
77 690
ROOM PANEL
ROOMSTER II RTx
USER’S MANUAL FOR ASSEMBLY AND HANDLING
The room panel ROOMSTER was designed for cooperation with the
Expert PID Dynamic 4D regulators
and chosen models of
Luksus EKO PID
Dynamic
regulators. It has a house temperature week program with the
exact measurement of the room temperature from 0,1
o
C. Thanks to the
built-in communication with the boiler the device displays information
about emergencies and measured temperatures. The panel has its’ own
memory for the user’s settings and in case of cooperation with the Expert
regulator it automatically synchronizes the actual timing from the boiler
controller, without having to adjust it manually.
I. Preparation for work.
The room panel ROOMSTER RTx connects wirelessly with the boiler
temperature regulator through radio communication module attached to
the regulator. The radio communication module and the room panel com-
municate on the selected frequency channel. The default settings indicate
operation on the 0 channel. When in the room there are more than 1 room
panels operation, each of the module-panel pairs must communicate on
different frequency channel. In such case there is a necessity to change the
default settings.
1. Preparation of the communication module RTX.
When the boiler temperature regulator, either Expert or Luksus, is in
the built-in version, the communication module must be connected to the
regulator through putting the XLR plug to the appropriate socket in the
sensor panel on the boiler. In other cases the connection must be made
through connecting three-wire cable coming out of the module to the regu-
lator terminal or valve intended for connect the panel:
Terminal designations:
Yellow
color
Version 1
Version 2
brown
1
Br
white
2
Bi
green
AUX +5V
AUX +5V
Summary of Contents for ROOMSTER II RTx
Page 11: ...11 ...
