background image

19481-2-0115

Page 1

Installation and 

Operation Instructions

Bifold Glass Door models:

 BVX2BL-1 

(For use with (A)BVD34FP Fireplace model series)

 BVX36BL-1 

(For use with (A)BVD36FP Fireplace model series)

 BVX3BL-1 

(For use with (A)BVP42FP Fireplace model series)

IMPORTANT: Please read these instructions carefully before starting 

the installation. Failure to follow these installation instructions may re-

sult in a possible fire hazard and will void the warranty. These instruc

-

tions must be left with the appliance for future reference.

IMPORTANT NOTICES

1.  Be sure these instructions become the property of, and are reviewed by, all future users of 

the fireplace to encourage proper installation and operation of the glass doors.

2.  Read these instructions entirely before beginning the installation. Save the instructions for 

future reference.

3.  All parts used with the fireplace system must be installed in accordance with these instal

-

lation instructions. Failure to do so may be hazardous and will void the warranty.

4.  Check to make sure all parts are included prior to assembly. See parts list on page 4 for 

reference.

5.  Tools needed for installation includes standard and Phillips screwdrivers, and a 5/16” nut

-

driver. 

6.  Caution: sharp edges. Wear gloves and safety glasses when installing the glass door com

-

ponents.

7.  Decorative non-combustible trim or finishing materials must not extend beyond the firebox 

side openings. Any materials that extend past the firebox side opening will interfere with 

the operation of the glass doors.

8.  Bifold doors must be in the fully open position when operating the fireplace.

GAS-FIRED

UL FILE NO. MH45034

f i r e - p a r t s . c o m

Summary of Contents for BVX2BL-1

Page 1: ...Read these instructions entirely before beginning the installation Save the instructions for future reference 3 All parts used with the fireplace system must be installed in accordance with these instal lation instructions Failure to do so may be hazardous and will void the warranty 4 Check to make sure all parts are included prior to assembly See parts list on page 4 for reference 5 Tools needed ...

Page 2: ...st above the firebox that will accept the canopy s rear tabbed flange With the canopy tilted slightly upward insert the canopy so that the rear locator tabs lock into the slots located in the firebox top Rotate the canopy downward and install one 10 x Hex Hd screw at the center of the canopy This screw will be installed from inside the firebox The location is midway between the two firescreen rods...

Page 3: ...en tighten screws to secure spring clips Figure 4 DOOR OPERATION OPERATE THE FIREPLACE WITH THE BIFOLD GLASS DOORS IN ONLY THE FULLY OPEN POSITION NOTE Always close the mesh firescreens when operating the fireplace with the glass doors open FULLY OPEN DOORS CORRECT DOOR POSITION WHEN OPERATING THE FIREPLACE Figure 6 PARTIALLY OPEN DOORS INCORRECT DOOR POSITION WHEN OPERATING THE FIREPLACE 6 Repeat...

Page 4: ...ion QTY BVX2BL BVX36BL BVX3BL 1 19485 19497 19502 Bifold Door Ass y Left 1 2 19484 19496 19501 Bifold Door Ass y Right 1 3 19483 19495 19500 Door Track 1 4 19842 19494 19499 Canopy 1 5 R7882 R7882 R7882 Handle 2 6 R8112 R8113 R8114 Glass Panel 4 7 R8197 R8197 R8197 Screw 8 32x7 8 4 8 R8119 R8119 R8119 Clip Door Spring 2 9 R3580 R3580 R3580 Screw 8 18x1 2 8 10 R2737 R2737 R2737 Screw 10x1 2 1 11 R8...

Reviews: