background image

Page 1

INSTALLATION INSTRUCTIONS

AND OWNER’S MANUAL

BIRCH LOGS

WARNING

FIRE OR EXPLOSION HAZARD

If the information in these instructions is 

not followed exactly, a fire or explosion may 

result causing property damage, personal 

injury or loss of life. 

—  Do not store or use gasoline or other 

flammable vapors and liquids in the 

vicinity of this or any other appliance.

—  WHAT TO DO IF YOU SMELL GAS

•  Do not try to light any appliance.

•  Do not touch any electrical switch; 

do not use any phone in your building.

•  Leave the building immediately.

•  Immediately call your gas supplier 

from a neighbor’s phone. Follow     

the gas supplier’s instructions.

•  If you cannot reach your gas  

supplier, call the fire department.

—  Installation and service must be 

performed by a qualified installer, 

service agency or the gas supplier.

INSTALLER: 

Leave this manual with the appliance.

CONSUMER: 

Retain this manual for future reference.

Log sets comply with ANSI Z21.11.2 Unvented 

Heaters  and  also  comply  with  ANSI  Z21.60 

Decorative Vented Appliances for Solid Fuel 

Burning Fireplaces. State or local codes may 

only allow operation of log sets in a vented 

configuration. Check your state or local codes.

 �

WARNING

If  not  installed,  operated  and  maintained 

in  accordance with the manufacturer's 

instructions, this product could expose you 

to substances in fuel or from fuel combustion 

which can cause death or serious illness.

Please See Our Website For Log Assembly Videos.

LOG SET FOR 

UNVENTED 

GAS LOG HEATER OR VENTED 

DECORATIVE APPLIANCE

MODELS:     

LS18CB-1

LS24CB-1

LS30CB-1

GAS-FIRED

LS24CB 

SHOWN

Summary of Contents for LS18CB-1





























Reviews: