Trilennium
®
3020 Multi-Point
Locking System
Replacement Instructions
• Screwdriver or Drill
TOOLS REQUIRED:
• Trilennium
®
3020 Multi-Point Lock
• Mounting Screws
KIT INCLUDES:
STEP 1: REMOVE THE HANDSET FROM THE INACTIVE DOOR PANEL
Remove the screws securing the handset from the interior
escutcheon. Make sure to hold the exterior escutcheon as the screws
are being removed to prevent damage. Set aside the handset along
with all of the internal components.
STEP 2: REMOVE THE DUMMY ASTRAGAL FROM THE INACTIVE DOOR PANEL
b.
Remove the dummy astragal from the door
panel and set it aside for reinstallation later.
a.
Remove the strike plate assemblies and set aside for
reinstallation later.
Note carefully where each screw goes, particularly
the two machine screws holding the center strikes.
They will be
shorter
than the rest.
!
Exterior
Escutcheon
Interior
Escutcheon
!
