support@enphaseenergy.com
1 877 797 4743
ENPHASE QUICKSTART GUIDE
1
REGISTER
Installers: Begin the activation process
• First-time installers: Go to enlighten.enphaseenergy.com/register and complete
the form. Your login credentials will be emailed to you.
• Self-installers: Click on the “Self-installed” checkbox.
• Existing installers: Log into Enlighten, click “Add New Activation” in the Installation
Status widget.
2
INSTALL
Install the PV modules and microinverters
Consult the microinverter installation manual for installation and commissioning
instructions.
3
CONNECT
Install the Envoy Communications Gateway
• Connect to a broadband router and plug into a dedicated wall outlet.
• Wait 15 minutes to allow the Envoy to start detecting the microinverters in your array.
• Ensure at least 2 level bars and the correct number of microinverters are showing
(see overleaf for troubleshooting).
LEVEL
05:00
+WEB
Devices: 15
Consult the Envoy installation manual for more details.
4
ASSIGN
Use the Array Builder to generate the array
• Once all microinverters have been detected, log in to Enlighten to
use the Enlighten Array Builder.
• For guidance on how to use the Array Builder, please visit
www.enphase.com/support/learningcenter.cfm
4 Easy Steps
Solar PV power systems should be
installed by qualified personnel.
980000000366-
980000000364-
980000000364-
980000000362-
980000000367-
BROADBAND ROUTER
LAN CABLE
1
2
3
1
2
3
