background image

 

 

Pixel Octo 

ETHERNET PIXEL DRIVER

 

 

Contents

Package Contents .................................................................... 1

 

Safety Information .................................................................. 1

 

LED Protocols Supported ....................................................... 1

 

Physical Dimensions ............................................................... 1

 

Functional Features ................................................................ 2

 

Hardware Features .................................................................. 2

 

LED Status .................................................................................. 2

 

Status ..................................................................................... 2

 

Link 1 and Link 2 .................................................................. 2

 

Identify Button ......................................................................... 2

 

Wiring Diagrams ....................................................................... 3

 

Default IP ................................................................................... 4

 

Finding the IP Address Using NMU ...................................... 4

 

Web Configuration ................................................................... 5

 

Home ...................................................................................... 5

 

Identify Button ..................................................................... 5

 

Settings ...................................................................................... 6

 

Direct .......................................................................................... 6

 

DMX Protocols ...................................................................... 6

 

Universes/Outputs ............................................................. 7

 

Group Pixels ......................................................................... 7

 

DMX Start Address ............................................................... 7

 

Standalone................................................................................. 7

 

Show Options 

 Activate Standalone Show ................. 8

 

Creating a Standalone Show ........................................... 8

 

Deleting a Standalone ..................................................... 10

 

Copying a Standalone Show ........................................... 11

 

Importing and Exporting a Standalone List ................ 11

 

Network Stats .......................................................................... 11

 

Art-Net and ESP ................................................................. 11

 

sACN ...................................................................................... 11

 

KiNET ..................................................................................... 12

 

Update Firmware .................................................................... 12

 

Reset to Factory Defaults ..................................................... 12

 

Using Web Interface .......................................................... 12

 

Using Button ....................................................................... 13

 

Tips and Guidelines ............................................................... 13

 

Ordering Information ............................................................ 14

 

Specifications .......................................................................... 14

 

 

Summary of Contents for 71520
















Reviews: