background image

Version: Nov 16

Call 1300 369 273

www.enware.com.au

Enware Australia Pty Limited 

9 Endeavour Rd Caringbah NSW 2229 Australia 

Ph: 02 8536 4000   Fax: 02 8556 4055

CDF320DC

Barrier Free Hi-Lo Wall Mounted  

Drinking Fountain with Chiller

CLEARANCE 305mm

MOUNTING FRAME 

WIDTH 101.6mm

473

991

864

812

686

708

WASTE

729

SUPPLY

856

SUPPLY

835

WASTE

Product Code

CDF320DC

Wall Mounted Hi-Lo Round Bowl Barrier Free 
Drinking Fountain with Chiller

FEATURES

Drinking Fountain

•  Polished chrome-plated brass 

bubbler & push button

•  Satin finish waste strainer
•  Vandal-resistant bottom plate
•  Special mounting plate
•  Brushed Finish 18 gauge Type 

304 Stainless Steel

•  Removable lower panel for easy 

installation

Chiller

•  Provides up to 30l/hour of mains 

pressure chilled water.

•  Stainless steel storage tank and 

pipework

•  Louvered front ventilation panel
•  Easy access for maintenance
•  Environmentally friendly R134A 

refrigerant

•  Optional carbon filter available

A sophisticated stainless steel barrier-free split height drinking 
fountain with stylish sculpted round bowls and under counter chiller 
unit. Matching brushed finish back panel and vandal resistant 
bottom plate.Bubbler and push button are polished chrome-plated 
brass. Waste strainer has a satin finish.

Enware tapware must be installed in accordance with the provisions of AS/NZS3500 and any 
relevant local regulations. Installations not complying with AS/NZS3500 may void the product 
and performance warranty provisions.

Drinking Fountain

Inlet Connection

½” BSP Female

Minimum Supply Line Size

½”

Waste Water Outlet Connection

1-1/2” BSP (40mm) Male

Technical Information

Chiller

Flow Rate

30 lph

Refrigerant

R134A

Power Supply

240V/50Hz

Power Connection

3 pin 7.5A Plug with 1.8m lead

Working Pressure Range

200 - 500 kPa

Dimensions

437H x 338W x 261D

This product is disability friendly, designed to the technical 

requirements of the ADA (American Disability Act 2010 

- Standards for Accessible Design), however it does not 

comply in full with AS1428.2 1992

ATS5200.105 WM-022628

IAPMO R&T OCEANA

Reviews: