background image

To get up and running with ePipe quickly, follow the four 

step “Quick Setup” below.
To understand how you can use ePipe see “Using ePipe” 

in the “ePipe Exposed” section of the Stallion Software & 
Documentation CD-ROM.

Ê 

Before you Start

Check the packing list below to ensure you have all the 

correct parts (cables are color coded for identification):
Your ePipe kit should contain: 

 

 

ePipe 2148 (4 port) or 2188 (8 port) unit

 

AC/DC power supply unit

 

Ethernet UTP cable 

(green connector)

 

Two modem cables -  RJ45 to DB25 

(orange connector)

 

Console cable with DB9 connectors 

(black)

 

RJ45 loopback adapter 

(black)

 

Stallion Software & Documentation CD-ROM

 

Warranty Registration Card

 

Quick Setup Guide (this card)

Ë

 

What Else do you Need?

To  connect  your  ePipe  to  an  Internet  Service  Provider  (ISP)  or  other  network  you  will 

need the following:

•     

Personal Computer running Windows (95, 98, NT or 2000) with an Ethernet 

Network Interface Card (NIC) configured and ready to go

•     

One or more analog modems or ISDN Terminal Adapters (TAs)

•     

Appropriate  cables  to  connect  your  modem/TA  to  the  ePipe. 

(Two  RJ45  to  DB25  cables  are  included.  For  additional  modem  cables, 

Stallion has a kit available.) For part numbers, other cabling requirements 

and all cabling pinouts refer to the appropriate area of the CD-ROM or to 

Stallion’s web site - 

http://www.stallion.com/

•     

One or more analog or digital (ISDN) phone lines

•     

One or more accounts with an ISP for connecting to the Internet

•     

(Optional)  Hub  or  switch  to  connect  more  than  eight  devices  to  the 

ePipe hub

Item # 730118 Revision 1.00

Troubleshooting

Should you experience any difficulty with your ePipe, you may want to recheck previous 

steps in this Quick Setup Guide to ensure correct installation.
Each ePipe is shipped with diagnostic tools that allows you to fully test the operation of 

the unit. If you experience a problem with your system or network, the diagnostics will 

help  enable  you  or  your  support  provider  to  pinpoint  the  difficulty.  Consult  the  ePipe  
documentation for more information.

Documentation CD-ROM and Stallion Web Site

All documentation for ePipe and other products is contained in the User Documentation 

area of the CD-ROM and on the Stallion web site at 

http://www.stallion.com/

. A section 

in  this  documentation  is  dedicated  to  problem  determination.  Please  ensure  these 

procedures are followed before reporting a fault.

Warranty / Registration

Stallion is offering 

free telephone support

 for the term of ePipe’s three year limited 

warranty by completing the on-line registration available from the Stallion web site at 

http://www.stallion.com/

, or by mailing the completed ePipe Warranty Registration Details 

form to the nearest Stallion office (see below) within 30 days of purchase. Unregistered 

users may access our Technical Support Team by email only. Registered customers will also 
receive the latest information on Stallion's leading-edge product developments. 

Corporate Addresses

Asia/Pacific                            The Americas                                   Europe / Middle East / Africa

Stallion Technologies P/L        Stallion Technologies, Inc.                  Stallion Technologies GmbH

P.O. Box 954                           2880 Research Park Drive, Suite 160Martin-Behaim-Strasse 12  

Toowong QLD 4066                Soquel, CA 95073                              63263 Neu-Isenburg 

AUSTRALIA                            USA                                                   GERMANY

Tel:   +61 7 3270 4242             Tel:   +1 831 477 0440                       Tel:   +49 6102 7397-0

Tel:   +61 7 3270 4243 (supp)  Tel:   +1 800 729 2342 (supp)            Fax:  +49 6102 7397-10

Fax:  +61 7 3270 4245             Fax:  +1 831 477 0444                       Email: 

euro-support@stallion.com

2148 / 2188

Quick Setup Guide

ePipe Quick Setup Guide

Summary of Contents for 2148

Page 1: ... Need To connect your ePipe to an Internet Service Provider ISP or other network you will need the following Personal Computer running Windows 95 98 NT or 2000 with an Ethernet Network Interface Card NIC configured and ready to go One or more analog modems or ISDN Terminal Adapters TAs Appropriate cables to connect your modem TA to the ePipe Two RJ45 to DB25 cables are included For additional mode...

Page 2: ...e provided green to connect one hub port on your ePipe to a 10 Mbps uplink or cross over port on your existing Ethernet hub or switch If you do not have an uplink port then use an Ethernet cross over cable Your Ethernet hub switch may have a button or switch that turns a port into an uplink port This should be enabled when connecting other hubs such as in the ePipe to this uplink port Attaching De...

Page 3: ...nnect a terminal or PC to the ePipe console port using the console cable If using a PC then you will need terminal emulation software Windows users can use HyperTerminal in Accessories Set the terminal or emulation software at a speed of 9600 bps 8 data bits 1 stop bit no parity and software XON XOFF flow control Once you connect then press the Enter key several times to obtain a login prompt You ...

Page 4: ...e reporting a fault Warranty Registration Stallion is offering free telephone support for the term of ePipe s three year limited warranty by completing the on line registration available from the Stallion web site at http www stallion com or by mailing the completed ePipe Warranty Registration Details form to the nearest Stallion office see below within 30 days of purchase Unregistered users may a...

Reviews: