background image

Proof Sign-off:
KOW M.Arai  K.Nishi
K.Nishi
J.Hoadley

R4C3610  Adm/G
Rev. C

A5 size

FRONT.FM

8/4/00

Pass 0

R

Administrator’s Manual

C82362

/C82363

/ C82364

✽ 

EpsonNet 10 Base 2/T Int. Print Server
EpsonNet 10/100 Base Tx Int. Print Server

All rights reserved. No part of this publication may be reproduced, stored in a retrieval 
system, or transmitted in any form or by any means, electronic, mechanical, photocopying, 
recording, or otherwise, without the prior written permission of SEIKO EPSON 
CORPORATION. The information contained herein is designed only for use with this EPSON 
product. EPSON is not responsible for any use of this information as applied to other 
products.

Neither SEIKO EPSON CORPORATION nor its affiliates shall be liable to the purchaser of 
this product or third parties for damages, losses, costs, or expenses incurred by purchaser or 
third parties as a result of: accident, misuse, or abuse of this product or unauthorized 
modifications, repairs, or alterations to this product, or (excluding the U.S.) failure to strictly 
comply with SEIKO EPSON CORPORATION’s operating and maintenance instructions. 

SEIKO EPSON CORPORATION shall not be liable against any damages or problems arising 
from the use of any options or any consumable products other than those designated as 
Original EPSON Products or EPSON Approved Products by SEIKO EPSON 
CORPORATION. 

EPSON and EPSON ESC/P are registered trademarks and EPSON ESC/P 2 and EPSON 
Stylus are trademarks of SEIKO EPSON CORPORATION. 

This product Includes software developed by the University of California, Berkeley, and Its 
contributors.

General Notice:

 Other product names used herein are for identification purposes only and may be 

trademarks of their respective owners. EPSON disclaims any and all rights in those marks.

Copyright © 2000 by SEIKO EPSON CORPORATION, Nagano, Japan.

®

Summary of Contents for C82362
























































































































































































































































































Reviews: