EPSON Perfection
®
1660 Photo
Start
Here
Start
Here
1
Make sure you have everything:
See your on-screen
Scanner Reference Guide
for instructions on
scanning slides and negatives.
2
Remove all the packing tape, but leave the yellow sticker
in place for now.
IMPORTANT!
Leave the yellow sticker in
place until you’re instructed
to remove it.
Unpack Your Scanner
Wait! You must install your software before connecting the
scanner to your computer. The install process may take up
to 15 minutes.
Be sure to close all open programs and turn off any virus
protection programs.
Windows
®
1
Insert the scanner software CD-ROM in the CD-ROM or DVD drive.
The installer starts automatically.
If it doesn’t start, open
My Computer
, double-click
EPSON
,
then double-click
EPSON
.
2
When you see a message asking you to disable antivirus software,
click
Continue
.
3
Read the license agreement, then click
Agree
.
4
At the Software Installation screen, click
Install
.
5
Follow the on-screen instructions to install each program. After each
one is installed, click
Next
or
Finish
to continue. Note that EPSON
Smart Panel™ installs in several steps. If you have PDA software on
your computer, Presto! PixExpress will be installed.
Please wait until the process is complete.
6
When you see this message, click
Yes
or
No
:
You see this screen:
NOTE: Presto! PixExpress will not be installed if you don’t
have PDA software on your computer. If you add it later,
you can install Presto! PixExpress. See your on-screen
Scanner Reference Guide
for instructions.
7
Click
Exit
. The EPSON Product Registration screen appears.
8
Register your scanner as instructed. At the last screen, click
Done
or
close your browser. Then follow the instructions in section 3 to connect
the scanner.
Install the Software
Macintosh
®
1
Insert the scanner software CD-ROM in the CD-ROM or DVD drive.
(If necessary, double-click the
EPSON
CD-ROM icon to open it.)
2
Double-click
.
3
When you see a message asking you to disable antivirus software, click
OK
.
4
Read the license agreement, then click
Agree
.
5
When the Software Installation screen appears, click
Install
.
You see the EPSON TWAIN 5 Installer:
6
Click
Install
.
When the EPSON TWAIN installation is complete, click
Restart
.
Don’t remove your CD-ROM. After your Macintosh restarts,
you can install the rest of your software.
7
When your Macintosh restarts, double-click the
EPSON
CD-ROM icon
to open it, if necessary, then double-click
. You see this screen:
8
Click
Install
and follow the on-screen instructions to install each
program. After each one is installed, click
Quit
to continue.
Note that EPSON Smart Panel installs in several steps. If you have
PDA software on your computer, Presto! PixExpress will be installed.
9
When you see this message, click
Yes
or
No
:
You see this screen:
NOTE: Presto! PixExpress will not be installed if you don’t
have PDA software on your computer. If you add it later,
you can install Presto! PixExpress. See your on-screen
Scanner Reference Guide
for instructions.
10
Click
Exit
. The EPSON Product Registration screen appears.
11
Register your scanner as instructed. At the last screen, click
Done
or
close your browser. Then follow the instructions in section 3 to
connect the scanner.
1
2
Connect the Scanner
3
AC adapter
Scanner
CD-ROM with EPSON
®
TWAIN driver, software,
and electronic manuals
USB cable
Film holder
Power cord
After your software is installed, it’s time to get connected!
1
Remove the yellow sticker from the back of the scanner.
2
Connect the cable for the built-in
transparency unit to the connector
on the back of the scanner.
3
Slide the transportation lock all
the way to the right.
4
Connect the power
cord and AC adapter,
as shown.
5
Connect the AC adapter
to the scanner.
6
Plug the other end of the power
cord into an electrical outlet.
The scanner turns on and begins
to warm up. The
Start button
on the front of the scanner flashes.
It stops flashing and turns green
when the scanner is ready.
7
Plug the square end
of the USB cable into the
scanner’s USB port.
8
Plug the flat end
of the
cable into any available USB port
on your computer.
NOTE: Your system may not work
correctly if you use a USB cable
other than the one supplied by
EPSON or if you connect to your
computer through a hub.
Now you’re ready to start scanning!
Turn this sheet over for step-by-step instructions.
Remove the
yellow sticker
Transportation
lock
AC adapter
Power cord
Click
Install
Click
Exit
Click
Install
Click
Install
Click
Exit
Click
install
Start button
Turn Over
AC adapter
Built-in
transparency unit
