Start Here
1
Make sure you have everything:
Note:
If you’ll be connecting your scanner using IEEE 1394 (FireWire,
®
iLink™), you need to purchase an IEEE 1394 cable (not included).
2
Remove all the packing tape, but leave the large sticker in place
until instructed to remove it.
3
Insert the hinges on the cover
into the square holes at the
back of the scanner. (Make
sure the cable does not get
caught under the scanner
cover.) Close the cover.
Unpack Your Scanner
Turn over
1
Scanner Software for Mac OS X
1
Insert the scanner software CD-ROM in the CD-ROM or DVD drive.
2
Double-click the
EPSON
CD-ROM icon and then double-click the
English
folder.
3
Double-click the
EPSON Scan Installer
icon.
4
Enter your Administrator name and password and click
OK
.
5
When you see the EPSON Scan Installer window, click
Install
,
then follow the on-screen instructions.
6
Double-click the
Reference Guide
icon.
7
Click
Install
to install your
Scanner Reference Guide
.
Install LaserSoft SilverFast, MonacoEZcolor, and the ArcSoft Software
Suite, following the instructions included with each program. Then continue
with the instructions under “Connect the Scanner.”
Scanner
CD-ROM with EPSON
®
Scan driver, software,
and electronic manuals
USB cable
Film holders
LaserSoft
®
SilverFast
®
Ai6
CD-ROM
Adobe
®
Photoshop
®
Elements
2.0 CD-ROM
IMPORTANT!
Leave the sticker in
place until you are
instructed to remove it.
Wait! You must install your software before connecting the scanner
to your computer. The install process may take up to 15 minutes.
Be sure to close all open programs and turn off any virus
protection programs.
If you don’t already have Adobe Photoshop or Photoshop Elements on your
computer, install Photoshop Elements from the CD-ROM included with your
scanner. To view the Photoshop user manuals, you’ll need Adobe Acrobat
®
Reader
®
(included on your Photoshop Elements CD).
Windows
®
First you’ll install Adobe Photoshop Elements, then your scanner software.
Photoshop Elements
1
Insert the Adobe Photoshop Elements CD-ROM in the CD-ROM or
DVD drive. The installer starts automatically.
2
Make sure
US English
is selected and click
Next
.
3
Follow the on-screen instructions to begin installation and accept the
software license conditions.
Install the Software
2
continue
4
When you see this screen, click the
Adobe Photoshop Elements
button.
5
Follow the on-screen instructions. When you’re asked for a software
serial number, enter the number printed on the sticker attached to the
CD-ROM sleeve.
6
If you don’t have Acrobat Reader, eject the CD-ROM and repeat
steps 1 – 3. Then select
Adobe Acrobat Reader
to install it.
Continue with the instructions below to install the scanner software.
Scanner Software
1
Insert the scanner software CD-ROM in the CD-ROM or DVD drive.
The installer starts automatically.
If it doesn’t start, double-click
My Computer
(in Windows XP, click
Start
>
My Computer
), double-click
EPSON
, then double-click
EPSON
.
2
When you see a message asking you to select a language,
click
English
.
3
At the Software Installation screen, click
Install
.
4
Read the license agreement, then click
Agree
.
5
Follow the on-screen instructions to install each program. After each
one is installed, click
Next
or
Finish
to continue. Note that EPSON
Smart Panel™ installs in several steps. If you have PDA (Palm™ or
Pocket PC) software on your computer, Presto! PixExpress will be
installed.
6
Click
Exit
. The EPSON Product Registration screen appears.
7
Register your scanner as instructed. At the last screen, click
Done
or
close your browser.
Install LaserSoft SilverFast, MonacoEZcolor, and the ArcSoft Software
Suite, following the instructions included with each program. Then continue
with the instructions under “Connect the Scanner.”
Click
Install
Click
Adobe
Photoshop
Elements
5
When you’re asked for a software serial number, enter the number
printed on the sticker attached to the CD-ROM sleeve.
6
When you see this screen, click the
Install
button.
7
Follow the on-screen instructions to install the software.
8
When you’re finished, click
Quit
.
9
If you don’t have Acrobat Reader, you can install it from the CD-ROM.
Open the
Adobe Acrobat Reader
folder. Then double-click the
Reader
Installer
icon to install it.
Continue with the following instructions to install the scanner software.
Scanner Software for Mac OS 8.6 – 9.x
1
Insert the scanner software CD-ROM in the CD-ROM or DVD drive.
(If necessary, double-click the EPSON CD-ROM icon to open it.)
2
Double-click .
3
When you see a message asking you to select a language,
click
English
.
4
When the
Software Installation
screen appears, click
Install
.
5
Read the license agreement, then click
Agree
.
6
When you see the EPSON Scan Installer, click
Install
.
When the EPSON Scan installation is complete, click
Restart
.
Don’t remove your CD-ROM. After your Macintosh restarts,
you can install the rest of your software.
7
When your Macintosh restarts, double-click the EPSON CD-ROM
icon to open it, if necessary, then double-click . Click
English
.
You see this screen:
8
Click
Install
and follow the on-screen instructions to install each
program. After each one is installed, click
Quit
to continue. Note
that EPSON Smart Panel installs in several steps. If you have PDA
(Palm) software on your computer, Presto! PixExpress will be installed.
9
Click
Exit
. The EPSON Product Registration screen appears.
10
Register your scanner as instructed. At the last screen, click
Done
or
close your browser.
Install LaserSoft SilverFast, MonacoEZcolor, and the ArcSoft Software
Suite, following the instructions included with each program. Then continue
with the instructions under “Connect the Scanner.”
Click
Install
Click
Install
Scanner cover/
transparency unit
Macintosh
®
First you’ll install Adobe Photoshop Elements, then your scanner software.
Photoshop Elements
1
Insert the Adobe Photoshop Elements CD-ROM in the CD-ROM or
DVD drive.
2
Double-click the or CD-ROM icon and double-click the
English
folder.
3
Double-click the
Install Photoshop Elements
icon.
4
Follow the on-screen instructions to begin installation and accept the
software license conditions. In Mac
®
OS X, enter your Administrator
name and password, then click
OK
.
Click
Install
EPSON Perfection
®
3200 Pro
4040929-01 Printed in Singapore XXX
Click
Install
continue
continue
3
Connect the Scanner
After your software is installed, it’s time to get connected.
1
Remove the sticker from the transportation lock. Use a coin to turn
the lock clockwise one-quarter turn to unlock the scanner carriage.
2
Remove the sticker from the back of the scanner.
3
Connect the cable for the built-in transparency unit to the round
connector on the back of the scanner. You may need to raise the
scanner cover and twist the cable to insert it.
Remove sticker
Make sure the
arrow faces up
continue
ArcSoft
®
Software Suite
CD-ROM
MonacoEZcolor 2 CD-ROM
