Overview
This flyer is a brief description of the major functions of the KEEPER device (please also notice the
reverse side). Please read the whole user manual before the application of the warning unit!
D2SENSE KEEPER 100
Activation and Deactivation
On/Off- push-button
: The push-button has to be
pressed at least for 1 or 3 seconds respectively in order
to
activate
or
deactivate
the
KEEPER.
The
activation/deactivation operation is accompanied by the
segment display and a tone. The process is completed
by a high double sound and flashing
Danger Zone LEDs
.
If the push-button is released too early, the procedure
has to be repeated (key lock against unintended
activation and deactivation during normal operation).
Status- and Charge Level
The Status- and Charge Level-LED
indicates the status and charge level of
the KEEPER in two stages:
•
Flashes green: The device is active
and the charging state is higher than
20% of the initial capacity.
•
Flashes red: The battery capacity is
lower than 20%. The red LED
indication is supplemented by a
periodic warning tone.
LEDs Danger Zone 1
LEDs Danger Zone 2
Number of
persons in
warning zone
Status- and
Charge Level-LED
Coupling push-
button
On/Off- push-
button
Device Coupling-
Status LED
Antenna
Connectors
Coupling BEEPER and KEEPER
See BEEPER brief instruction!
St
an
d
0
1
/2
0
1
4
See over
USB Connection
