background image

29" (73.7 CM) GAS DRYER INSTALLATION INSTRUCTIONS

DRYER SAFETY

Table of Contents

DRYER SAFETY................................................1

INSTALLATION INSTRUCTIONS ....................3

Tools and Parts..............................................3
Location Requirements .................................3
Electrical Requirements .................................5
Gas Supply Requirements.............................5
Venting Requirements....................................7
Plan Vent System...........................................7

Install Vent System ........................................9
Install Leveling Legs.......................................9
Level Dryer .....................................................9
Make Gas Connection .................................10
Connect Vent ...............................................10
Reverse Door Swing (Optional) ...................10
Complete Installation ...................................11

8562589

You can be killed or seriously injured if you don't immediately

You can be killed or seriously injured if you don't follow

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”

These words mean:

follow instructions.

instructions.

DANGER

WARNING

IMPORTANT SAFETY INSTRUCTIONS

When discarding or storing your old clothes dryer, remove the door.

SAVE THESE INSTRUCTIONS

Summary of Contents for EGD4100SQ













Reviews: