INTRODUCTION
This is an accurate, fast, smart and easy-to-use air quality monitor. In addition to measure the PM2.5
and CO
2
concentration, it also displays the
hazardous
level and monitor ambient temperature and relative
humidity. This monitor not only provides instant value but also record measurement for future check.
Features:
Large LED displays PM2.5, Health index, CO
2
value, humidity and temperature
.
12000 times auto logging. USB2.0 plug and play. No need to operate through specific software.
Wall mount display with dual light bar to provide
hazardous
level indicator from far distance
Touch panel to program the setting
High accuracy laser optical PM2.5 sensor
NDIR (non-dispersive infrared) waveguide CO
2
technology
3-color lightbar (green / yellow / red) gradually changes color for PM2.5 and CO
2
concentration.
CO
2
a
utomatic
b
ackground
c
alibration(called ABC) for long time drift compensation
Buzzer alarm function is included
Areas of application: Widely used in the office building, school, exhibition hall, shopping mall,
meeting room, fitness center, restaurant and other public places where personal comfort and healthy
are important.
The standard package contains below:
CO
2
monitor x 1pc
USB-C cable x 1pc
NOTE: provided USB-C cable is for both data transfer and power charging.
Operation manual x 1pc
Sticker & Screws for wall mount hanging, dust filter x 1 pack
MATERIAL SUPPLIED
CAUTION
Please take off the AC power adapter when this monitor left idle for long. Please use a standard USB power
supply (such as PC's USB port, universal AC adapter with USB port). Improper power supply can cause
serious damage to the device, or result in injury or death to the user.
The vents allow the air circulation liquid for measurement of the CO
2
concentration and the ventilation
should not be blocked.
OPERATION MANUAL
PM2.5, CO
2
, HUMIDITY, TEMP.
WALL MOUNT/DESKTOP DATALOGGER
Model:7710
POWER UP
This meter is designed as wall mount & desktop use. It is powered up by 5VDC through USB-C cable.
For mobility, you may also use power bank for temporary use. Once meter is powered, the LED will auto
turn on.
1
Prepare an 5V
USB adaptor
2
Power up the
meter through
USB type-C
(
Not included in package)
3
Power up the
meter through
USB type-C
1
4
Requires 30 minutes
powered on time before
using the logging
function
30 mins
www.ete.co.th