Home
/
Etneo
/
Q200
/
Instruction Manual

Etneo Q200, Instruction Manual

The Millenium Q200 Instruction Manual is available for download, completely free of charge, on our website. This comprehensive manual guides you through every feature and function of the Millenium Q200, providing valuable information and troubleshooting tips. Get your user manual now at 88.208.23.73:8080.

Share

1
2
3
4

Page: 1 / 4

background image

Scientific technological Center

Via Bovio 6 – 28100 Novara - NO - Italy

Tel +39 0321697200 - Fax +39 0321 688515 - Email:

Lead Free Soldering Pot

INSTRUCTION MANUAL

Q200/400

1.

Safety Instruction

WARNING



Please read this instruction manual before operating the unit for avoiding the accident



The unit must use three grounding cord and socket for good ground, including the prolonging

power cord



Do not use the unit to other task except to melt the soldering tin

1
2
3
...
»

Summary of Contents for Q200

Page 1: ... Lead Free Soldering Pot INSTRUCTION MANUAL Q200 400 1 Safety Instruction WARNING Please read this instruction manual before operating the unit for avoiding the accident The unit must use three grounding cord and socket for good ground including the prolonging power cord Do not use the unit to other task except to melt the soldering tin ...

Page 2: ...or avoiding accident No use the unit in the damp surrounding No use the unit with the broken power cord When the temperature is above 300 it will oxide the soldering tin and shorten the life of the unit Use the unit at the as lower temperature as possible When using the unit for the fist time please set a lower temperature such as 300 at fist and then wait unit the temperature is stable it can adj...

Page 3: ...b and then the unit comes to heat At the time the red LED is on 5 Adjust the temperature adjusting knob to the needed temperature scale 6 It needs spend some time to melt the soldering tin such as ten minutes from 25 to 300 It can put into service when the soldering tin has melted and the LED is twinkle or darkle If there are some oxides floating on the surface it must clear off the oxides and kee...

Page 4: ...er pot is not heating If the power supply and the fuse are both in gear at the moment it can judge the sensor is in malfunction B Because the pot may be eroded after using a period of time it must check the pot periodically Suggest If using lead soldering tin it should check at least one time each year as the setting temperature is 250 and the work time is five days each week and eight hours every...

Reviews:

No comments

Related manuals for Q200

Brand: Hakko Electronics Pages: 20

Brand: ESD Pages: 26

Brand: Fahrenheit Pages: 21

Brand: Pace Pages: 20

Brand: Pace Pages: 57

Brand: Pace Pages: 41

Brand: jbc Pages: 12

Brand: jbc Pages: 7

Brand: Hakko Electronics Pages: 20

Brand: SUN EAST Pages: 74

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands