ETON
SOUNDUPGRADE MERCEDES-BENZ PRESET
(C-CLASS & E-CLASS)
STEP 1
: Download & install the ETON DSP Control Center.
https://www.eton-gmbh.com/produkte/car-hifi/verstaerker/product/stealth-71-dsp/
STEP 2
: Install the power amplifier exactly according to the connection diagram in the vehicle, for this you need the ETON UG MB ACC (Mercedes-Benz Amplifier Connection Cabel).
Please pay attention to the correct cable colours and the correct polarity of the speakers.
Channel 1+2 = Front system (UG MB 100 F and crossovers included in the set)
Channel 3+4 = Front left + right under-seat bass (UG MB 195 L, high-power output on the Stealth 7.1 DSP)
Channel 5+6 = Rear system (UG MB 100 RX and crossovers included in the set)
Channel 7 = Centre coaxial speakers (UG MB 100 CNX and crossover included in the set)
STEP 3
: When using the amplifier for the first time, please ensure that you first update the MCU of your Stealth 7.1 DSP amplifier to ensure that it is up to date. To do this, follow the MCU update
instructions, which you can find online.:
https://www.eton-gmbh.com/produkte/car-hifi/verstaerker/product/stealth-71-dsp/
STEP 4
: Connect to your amplifier via WiFi / WLAN, once connected, open the ETON DSP Control Center. Make sure that you are connected.
Once you are connected, you can play and save the PRESET to your amplifier. To do this, go to the „Load“ tab. A pop-up dialogue window will open, now navigate to the saved preset on your computer.
Select it and confirm the upload process with „open“. A pop-up window opens „Please Wait a moment“, during which the amplifier loads the preset. Please do not click away from this window! After the
preset has been loaded, click on „Settings“. In the next step, you can save the preset permanently in your Stealth amplifier. To do this, click on one of the two presets (A or B) that you want to use for saving.
As soon as the selected preset is active, it is highlighted. Then click on „Write“ and confirm with „OK“. The invited preset is now permanently stored in your amplifier.
PARTICULAR connection of front system, rear system and centre speakers with STEALTH 7.1 DSP
with UG MB ACC cable kit:
Front system: UG MB 100 F (install with included cabinet crossovers).
Rear system: UG MB 100 RX (install with included cabinet crossovers)
centre: UG MB 100 CNX (install with included cabinet crossover)
Subwoofer: UG MB 195 L
Amplifier: STEALTH 7.1 DSP
Connection cable kit: UG MB ACC
1
2
4
5
6
7
3
EN
