Evolve AP799 Quick Manual Download

Page: 1 / 7

- 1 -

Evolve AP799 Wireless Router

Quick Guide

Thank you for purchasing Evolve AP799 wireless router.

This guide will help you set the wireless router for Internet connection and wireless

networking. Before you continue, please ensure that the Internet connection is

working on your ADSL/Cable Modem.

Functional Overview

The Indicators on the Front Panel

Note:

The figures in this document are for reference only.

LED

Indicator

Color

Status

Description

Green On

Power is on.

Green On

The device runs normally.

Power

- Off

Power is off or the device is down.

WLAN Green

On Radio switch is turned on.

Summary of Contents for AP799

Page 2: ...hut off Green On Connection succeeds Green Blink Negotiation is in progress WPS Off No connection Green On Connection succeeds Green Blink Data is being transmitted WAN Off No WAN connection Green On LAN connection succeeds Green Blink Data is being transmitted LAN1 LAN2 LAN3 LAN4 Off No LAN connection ...

Page 3: ...s the factory default settings Power Power socket for connecting the power adapter WAN WAN interface for connecting WAN or the uplink network devices LAN1 LAN4 LAN interface for connecting hub switch or computer on LAN WPS WPS If WPS is enabled press this button for 1 second and then the wireless router starts to accept the negotiation of PBC mode ...

Page 4: ...wer socket on the wall Step2 Connect the ADSL Cable Modem to the WAN interface on the wireless router Step3 Connect your PC to the LAN interface on the wireless router Note You can connect to the router wirelessly by using the wireless configuration tool on the wireless client Please ensure that your Modem s LAN IP address does not conflict the router s IP address ...

Page 6: ...the 192 168 254 x network segment please follow the steps below to change the IP address of the wireless router 1 Log in to the Web user interface and then choose the Network Settings LAN Interface Settings 2 In the LAN Interface Settings page you can change the IP address and subnet mask of the wireless router 3 Click Save to save the settings ...