XVHUPDQXDOIRUWKHUDLQFDSH9&0
you receive the following accessories with your rain cape:
adapter ring CA 52
7REHDEOHWRIDVWHQWKHFDPHUDLQWKHUDLQFDSH\RXKDYHWREX\DVWHSXSULQJZKLFKFRQQHFWV\RXU
OHQVWRWKH&$$GDSWHUPPWKUHDG
You can buy this step-up ring from your local photo dealer.
1. Remove the sunshade from your lens and screw on the step-up ring
mentioned above in the filterthread of your lens.
2. screw the CA 52 adapter on the step-up ring mentioned above.
3. put the camera into the rain cape and push it with the adapter rings against
the optical front glassport.
4. push the camera upwards in the rain cape till the viewfinder is in front of the
rear PVC window.
5. close the cape with the press-stud to prevent the possibility of water splashing up onto the bottom of the
camera.
You can also use the LCD screen of the camera while the camera is in
the cape.
6.
Open the two PVC press buttons to be able to unfold the cape.
7.
Open the LCD monitor and pull the cape over it.
If you do not longer need the LCD monitor, just fold the rain cape together again
and close it with both PVC press buttons.
www.ewa-marine.de
info@ewa-marine.de
