Enbeam Fibre Optic Splice Closure
208-500 to 503 to Instruction Manual
1. Introduction
2. Specification
3. Physical Drawings
Installation
Preparation
Cable Preparation
208-500 to 503 The Enbeam fibre splice enclosures have been designed to house fibre optic connections for external applications
and the distribution of fibre cables where a high level of water resistance is required. It is widely used in many applications: aerial,
pole-mounting, wall-mounting, pipeline and direct burial. With an IP rating of IP68.
Weight (kg)
4.2~4.8
Max capacity (single core)
144 cores
Dimensions (mm)
450xф230
Type of sealing
Mechanical
Number of entrances
5 entrances (1 x oval for uncut
cable. 4x round
Capacity of single tray
24 cores
Oval Port for cable diameter (mm)
cable diameter Ф10mm to
Ф17mm
Round port for cable diameter (mm)
cable diameter Ф8mm to
Ф17.5mm
Number of trays
up to 6
•
Check all accessories of the splice enclosure and cable before installation.
•
All components of the splice enclosure must be kept dry and clean.
•
The working site must be kept clean (free from moisture and dust).
•
For uncut cable mark and strip the outer jacket 180cm
•
For Single cut cables strip the outer jacket by 120cm
•
Cut back the strength member to 5cm
180cm
uncut cable stripping length
general stripping length
120cm
5cm
