background image

1

CCD 220

CCD 320

IMPOR

TANT

:

Go to 

www

.extron.com

 for th

e

complete user guide and installation

instructions befor

e connecting the

product to the power sour

ce.

www

.extron.com

Cable Cubby Drawer CCD 220 and CCD 320 •
Installation Guide

This guide provides instructions for an experienced technician to 
install and connect the Extron Cable Cubby Drawer CCD 220 and 
CCD 320.
The Cable Cubby Drawers (CCD) are cable access sliding 
products that mount underneath furniture for AV connectivity, 
control, and power.

Planning

Check with local and state regulations before starting the installation

 

…

E

nsure that the planned installation complies with national and local building and electrical codes.

 

…

Ensure that the planned installation complies with the Americans with Disabilities Act or other accessibility        
requirements.

Check all parts and equipment before installation

 

…

Ensure that all parts are present in each kit.

 

…

Ensure that necessary tools and equipment are available for the installation.

Kit Contents

CCD 220

CCD 320

#8 pan-head wood screws

10 #8 pan-head wood screws

10

Cable tie-wraps

6 Cable tie-wraps

10

Tweeker

1 Tweeker

1

HD

MI

VG

A

AU

DIO

US

B

US

B C

HA

RG

ER

Summary of Contents for CCD 220













Reviews: