EZee Glider Manual
Congratulations on your purchase of the EZee Glider! Your glider is designed for years of nearly carefree use by
your child. These instructions include how to set up your glider and the maintenance procedures which you should
perform to ensure long-lasting use and optimal performance
Tools needed for Assembly:
Wrench (included)
Philips Screwdriver (not included)
Assembly Instructions
Your Glider comes partially assembled. The only things that you need to do are install the front wheel, install and
adjust the handlebars, and put in the seat.
Installing and Adjusting the Handle bar:
1.
Remove the plastic cover on the end of the handlebar stem by first removing the Velcro cover on top of the
handlebar stem and then loosening the chrome 12 mm bolt by
2-3 Turns
to the left. The plastic cover should
slide off.
